All Products

SKU: PL-1912

These 2×4-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable eight-wire connections in a compact dual-row housing. Compatible with male and female dual-r...

SKU: PL-1913

These 2×5-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires or crimp pins to create reliable, removable ten-wire connections in a compact dual-row housing. Compatible with male and f...

SKU: PL-1914

These 2×6-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable twelve-wire connections in a compact dual-row housing. Compatible with male and female dual-...

SKU: PL-1915

These 2×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable fourteen-wire connections in a compact dual-row housing. Compatible with male and female dua...

SKU: AF-2823

This 2×20-pin right-angle female header with 0.1" (2.54mm) pitch provides a convenient way to add right-angle connectivity to circuit boards with dual-row 40-pin headers. It mates with standard 2×20 dual male headers for easy board-to-board or board-to-cable connections. The right-angle orientat...

SKU: AF-1542

These single-row right-angle female headers with 0.1" (2.54mm) pitch are an essential building block for electronics projects. Use them to add right-angle socket connections to perfboards, PCBs, and prototyping setups — they accept 22AWG wire or standard male header pins. Each header is 36 pins ...

SKU: AF-753

These 0.1 µF ceramic capacitors are an essential component for any electronics project. Placed close to the VCC pin of your ICs, they filter out power supply noise and voltage spikes that can cause unstable behaviour — a fundamental best practice in circuit design. With 0.1″ lead spacing, these ...

SKU: DF-FIT0751

This 0.4 mm heat-resistant welding wire is built from seven 0.08 mm silver-plated copper conductors with a PFA insulation jacket. It handles temperatures from −60 °C to +250 °C, making it suitable for fine soldering work, rework, and environments where standard wire insulation would degrade. At ...

SKU: WS-26117 · MPN: 26117

This compact 0.85-inch IPS LCD display module gives you a small full-colour screen for embedded interfaces, status readouts and other maker projects. It uses an SPI interface, making it a practical match for microcontrollers and single-board computers with limited GPIO.Display size: 0.85 inchPane...

SKU: DF-DFR0847

This 0.96″ 160×80 Colour TFT Display delivers vibrant 16-bit (RGB565) colour output in an ultra-compact form factor. With an edge-to-edge design and a tiny 13.5 × 34 mm footprint, it is well suited for wearable devices, compact gadgets, and smart home interfaces. Driven by the ST7735 controller ...

SKU: LB-LR0085

The 0.96″ 128×64 OLED Display Module delivers crisp, high-contrast visuals in a compact 27 × 27 mm package. Driven by the SSD1306 controller over I2C, it requires only two I/O pins and operates across a wide 3.3–5V range, making it compatible with Arduino, STM32, ESP32, and other popular microcon...

SKU: WS-19653

This 0.96″ LCD Display Module is designed to plug directly onto a Raspberry Pi Pico via its onboard female pin header — no soldering or breadboard required. The 160×80 IPS panel delivers 65K RGB colours with wide viewing angles, driven by the ST7735S controller over SPI. Beyond the display, the ...

SKU: WS-25133

This 0.96″ RGB OLED Display Module features a 64×128 pixel resolution with 65K colours, delivering vivid and clear visuals from an OLED panel. Driven by the SSD1357 controller over SPI, it requires minimal I/O pins and comes with example code for Raspberry Pi, Arduino, and STM32 platforms. The m...

SKU: LB-24-OLED

This 0.96″ OLED Screen Module is a compact I2C display with a simple 4-pin interface, making it easy to add visual output to your micro:bit, Arduino, or other microcontroller projects. The high-contrast OLED panel provides clear text and graphics without requiring a backlight. With just four con...

SKU: PL-1595

A 1000:1 micro metal gearmotor from Pololu's popular N20-size range, featuring a high-power (HP) 6V brushed DC motor with precious metal brushes. With the highest gear ratio available in this series, it delivers extremely low output speeds and very high torque relative to its tiny size. At 6V wi...

SKU: PL-3070

A 1000:1 micro metal gearmotor from Pololu's popular N20-size range, featuring a high-power 6V brushed DC motor with long-life carbon brushes (HPCB). The carbon brushes offer significantly longer motor life compared to the precious metal brush (HP) version, while delivering the same performance. ...

SKU: LB-LS2788

A 100-piece assortment of solder seal heat shrink butt connectors in four sizes. These connectors combine soldering, insulation, and waterproof sealing into a single step — just apply heat and the solder ring melts to join the wires while the polyolefin tubing shrinks and the hot-melt adhesive se...

SKU: TB-RC5324

A pack of 2 ceramic disc capacitors rated at 100pF and 50V DC. Ceramic capacitors are non-polarised, making them suitable for both AC and DC circuits. They're commonly used for decoupling, bypassing, and high-frequency filtering applications. Key Features 100pF, 50V DC – General-purpose cerami...

SKU: LB-LS2575

A 100-piece prototyping kit with everything you need to take a breadboard project to a soldered prototype. Includes a selection of PCBs in four sizes, straight and right-angle headers, female headers, screw terminal blocks, and jumper caps — all organised in a plastic storage box. Key Features ...

SKU: AF-2193

A 10-pack of 100µF 16V electrolytic capacitors with long, flexible leads that make them easy to use on breadboards and perfboard. Each capacitor has clear labelling on the body for quick identification. Electrolytic capacitors are well suited for low-frequency filtering (~1kHz or less) and power...