All Products

SKU: SF-COM-10926

A 1N5819 Schottky diode rated at 1A and 40V. Schottky diodes are characterised by their low forward voltage drop (typically ~0.3V) and very fast switching speed, making them ideal for flyback protection on motor driver circuits, reverse polarity protection, and high-frequency rectification. Spec...

SKU: SF-COM-29757 · MPN: COM-29757

This compact Schottky diode is designed for efficient rectification where low forward voltage, low leakage and fast switching are important.It suits circuits that need higher current operation in a small surface-mount part, including designs operating at higher temperatures above 85°C.The manufac...

SKU: JU-W-LP232

Are you a proud supporter of science? Do you believe in its potential to make the world a better place? This enamel pin is a subtle reminder to always seek out evidence-based solutions and to trust in the power of scientific research. It's a great conversation starter and a way to connect with...

SKU: JU-W-LP233

Do you remember your first science project, the one that made you explode with glee!?  Science is not only about facts and figures, it's also about understanding how the world works, and this is where the magic comes in. Science can help us to unlock the secrets of the universe, or bake ...

SKU: AF-6051 · MPN: ADA6051

Add magnetic sensing to your project with this breakout built around the Texas Instruments DRV5032 digital Hall effect sensor. Its digital output changes when the magnetic flux density threshold is crossed, making it useful for detecting magnets, position, lids, doors, rotations and other simple ...

SKU: AF-5651

An I2C breakout board for the RDA5807M FM radio chip, designed by ScoutMakes as a beginner-friendly introduction to electronics and wireless communications. Tune into FM stations, display RDS data (station and song names), and control everything from an Arduino or CircuitPython sketch. The board...

SKU: LB-00333

Scratch is the wildly popular educational programming language used in millions of homes and schools worldwide to create interactive art, stories, games, simulations, and music videos.With "The Scratch Activity Cards," a colorful 52-card deck, kids work through beginner-friendly coding projects. ...

SKU: SF-PRT-28863 · MPN: PRT-28863

This simple pair of screw clamps is handy for securing parts of your project during mounting, helping keep cables or assemblies neatly held in place.They are the same style of clamps supplied with the Weather Meter Kit, making them useful as replacements, spares, or for similar outdoor sensing an...

SKU: LB-KEY-SCREW

These handy little screwdrivers can be used with our E-Textile boards to add and remove the M1.4 screws to access the coin cell battery.The screwdriver comes on a handy keyring so you can carry it round.These are also great for doing glasses repair and access to phones.

SKU: SF-PRT-13227

These are Philips-head M3 screws. They are 12mm long and come in packs of three. This is the screw size that the MiP robotic Platform and its add-on boards uses. Check below for the associated hardware.

SKU: SF-PRT-10450

Standard Philips-head 4-40 screws. They are 1" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: SF-PRT-10453

There are your standard Philips-head 4-40 screws. They are ¼" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: SF-PRT-08993

A standard Phillips head machine screw with 2-56 thread and a length of 9.5 mm (3/8"). Compatible with 2-56 nuts for securing panels, button pads, and small electronic assemblies. Specifications Head Type – Phillips Thread – 2-56 Length – 9.5 mm (3/8") Ideal For Button pad and keypad asse...

SKU: PI-PZ-58

The unique design of the jaws on these pliers mean that they will firmly grip screw heads, nuts, or bolts.The serrated jaws are angled inwards to grab the rim of the screw head allowing you to remove them no matter how damaged or specialised they might be! Slender jaws for access no mat...

SKU: PI-PZ-57

The Neji-Saurus screw removal pliers feature uniquely designed jaws that firmly grip screw heads, nuts, and bolts – even when they're stripped, rusted, or use tamper-proof heads. When a regular screwdriver just won't cut it, these pliers save the day. The serrated jaws angle inwards to grab the ...

SKU: EC-MCS01110

The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, and ...

SKU: DF-DFR0060

The Arduino-Compatible Screw Shield is a terminal expansion board that can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel secure with t...

SKU: DF-DFR0171

The DFRobot Arduino-Compatible Screw Shield is a terminal expansion board that allows you to screw in jumper wires to a screw terminal for a much stronger and secure connection for your I/O and power pins. Feel secure with this arduino-compatible screw shield. The screw shield v2 from DFRobot...

SKU: DF-FIT0181

This is a high quality 2-pin screw terminal. Very useful when you want to connect 24-18AWG wires to your circuits. SPECIFICATIONS Rated voltage: 300V Rated current: 10A Contact resistence: 20mΩ Insulation resistence: 5000Ω/1000V Voltage tolernce: AC2000V/1Min ...

SKU: PL-2441

These side-entry screw terminal blocks have a pitch of 5 mm (0.197″). Each block has three terminals for the stripped ends of 22 – 14 AWG wires, and units can slide together to make longer strips. They are rated for 250 V, 16 A (UL) and ship in packs of four.