All Products

SKU: SF-PRT-25233 · MPN: PRT-25233

This basic handheld enclosure is designed for building a comfortable, portable electronics project housing. Its rounded, ergonomic shape makes it suitable for instruments, controllers, sensor packs or other devices that need to be used in the hand.The enclosure is moulded from general purpose ABS...

SKU: AF-2504

Low-temperature thermoplastic beads (also known as Polymorph, Instamorph, or Friendly Plastic) that become moldable when heated to approximately 60 °C (140 °F). Simply heat in hot water until the beads turn clear and stick together, then knead and shape by hand. Once cooled, the plastic hardens t...

SKU: SF-COM-00315

The SN754410 is a quad half H-bridge motor driver IC capable of driving DC motors, stepper motors, and other inductive loads. It accepts TTL 5V logic inputs and can drive motors from 4.5V to 36V at up to 1A continuous output current per channel. A pin-compatible replacement for the popular L293D...

SKU: LB-LR0109

Add Bluetooth functionality to your project with the HC-05 Bluetooth Module. The module is found on a breakout board which provides breadboard-friendly headers for power, ground, TX, RX and enable pins. The breakout board also provides a 3.3V regulator so you can power it with 5V from an Ardui...

SKU: SF-COM-00314 · MPN: COM-00314

This HCPL-817 opto-isolator provides a single isolated channel for letting a simple microcontroller switch an external load. It is useful when you want to separate low-voltage control electronics from circuits driving relays, small motors or similar loads.The device comes in a 4-pin DIP through-h...

SKU: DF-ROB0021

The HCR Mobile Robot Kit is a two wheel drive mobile robot platform with three levels (if you want, you can use only the parts you need, or make a two level robot). The mobile robot kit contains two motors, two wheels, an omni-directional wheel, and hardware accessories such as metal plates...

SKU: DF-ROB0124

The HCR (Home Care Robot) is a full-metal open-source mobile robot research platform designed for robotics research and service robot application development. Equipped with three high-torque omni wheels with encoders, it is capable of omnidirectional translational and rotational motion. The plat...

SKU: DF-ROB0004

The HCR (Home Care Robot) Mobile Robot Platform is a two-wheel-drive robot chassis with a three-level structure, designed for building indoor service and research robots. The kit includes two DC motors with integrated encoders, two rubber wheels, an omni-directional caster wheel, three collision ...

SKU: SF-SEN-24049 · MPN: SEN-24049

This economical ultrasonic module provides non-contact distance measurement for range-finding and obstacle-detection projects. It measures from 2cm to 400cm, with ranging accuracy that can reach up to 3mm.Each module includes an ultrasonic transmitter, a receiver and a control circuit. The interf...

SKU: EF-EF03085

The HC-SR04 is a widely used ultrasonic distance sensor that provides non-contact measurement from 2 cm to 450 cm with up to 3 mm resolution. It uses a 40 kHz ultrasonic transducer pair — one transmitter and one receiver — to calculate distance based on the time-of-flight of a sound pulse. With ...

SKU: AF-3942

The HC-SR04 is an ultrasonic distance sensor that measures distances from approximately 2 cm to 400 cm (best results between 10–250 cm). Widely used in robotics, automation, interactive art, and motion sensing projects. The sensor requires 5V power and the Echo return signal is 5V logic. Two 10 ...

SKU: LB-PT24004

A 5-megapixel HD camera module designed for Raspberry Pi, connecting via the CSI interface for direct, low-latency video and image capture. No drivers required — plug it in and it's recognised immediately by the Raspberry Pi OS. With a maximum resolution of 2592×1944 and 30fps video capture, it'...

SKU: EC-AJP70043E

This 3.5" display features a resolution of 480 x 320 and a frame rate of 60 FPS or higher. Equipped with an HDMI interface, it's compatible with not only Raspberry Pi but also other devices. Designed specifically for Raspberry Pi, the touch panel function supports Raspbian, Ubuntu, and Kali Linux...

SKU: AF-2407

Its a mini panel-mountable HDMI monitor with a built-in touchscreen! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This backpack features the TFP401 for decoding video, and includes the attached displ...

SKU: AF-608

Connect two HDMI devices together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1 meter long (about 3 feet). This is a HDMI 1.3 cable.We're now stocking a very fancy Official Raspberry Pi cable with overmolding and a Pi logo. Please note that these molded...

SKU: LB-LS5174

An HDMI 2.1 cable supporting resolutions up to 8K at 60 Hz, with backward compatibility for 4K at 120 Hz and lower resolutions. Constructed with PVC-jacketed copper conductors for reliable signal transmission. Specifications Standard – HDMI 2.1 Supported Resolutions – 8K @ 60 Hz, 8K @ 120 Hz,...

SKU: LB-LS4542

This HDMI right angle adapter is perfect for connecting your HDMI device to your TV or monitor in tight spaces. The 90 degree design ensures a snug fit, while the male to female connectors provide a reliable connection. This adapter is compatible with all HDMI devices, making it a must-have for y...

SKU: LB-LS3659

Function: HDMI-compatible to CSI-2Restriction: supports up to 1080p25fpsUsage: Same as standard Raspberry Pi cameraChip: Toshiba TC358743XBG 45x30mm (the same width as PI ZERO, the same two holes) Package: HDMI-compatibleto CSI-2 adapter board *1

SKU: EC-ACC00170A

This HDMI connector is specially designed for CrowPi with Raspberry Pi 4B. If you want to upgrade your Crowpi to Raspberry Pi 4B, It is necessary to as a connector.

SKU: AF-4247

What do you do when you want to tinker with GPU hardware, but you don't have a display on hand?This HDMI Dummy Plug is a small device that acts as a display emulator. Once it's plugged into the video output socket on your device or computer, the plug punks the operating system into detecting a co...