All Products

SKU: LB-LR0044

This compact MPU-6050 module combines a MEMS accelerometer and MEMS gyroscope in a single chip for detecting movement, tilt and rotation across the X, Y and Z axes.Each channel is captured with 16-bit analogue-to-digital conversion, allowing the module to read the accelerometer and gyro axes at t...

SKU: SF-WRL-29523 · MPN: WRL-29523

This next-generation affordable SDR from Great Scott Gadgets is an open-source hardware platform for testing and developing modern radio technologies. It can transmit or receive radio signals and can be used as a versatile USB peripheral or programmed for stand-alone operation.HackRF Pro is desig...

SKU: AF-4501

HackSpace Magazine is the monthly magazine for the modern maker, published by Raspberry Pi Press. Issue #25 (December 2019) is the Maker Christmas edition, highlighting the best toys, tools, and trinkets for your hacker gift list. In This Issue DIY tutorial: Making sounds with NeoTrellis Linkin...

SKU: DF-TEM2022A-EN-1

We're excited to bring you three EEDU kits designed to make it easy for you to get started with AI, IoT, and environmental sensing using programming hardware. Each kit is built around an Arduino-compatible, ESP32-based FireBeetle board and comes with application-specific peripherals to help you g...

SKU: DF-TEM2022B-EN-1

An all-in-one IoT starter kit built around the FireBeetle 2 ESP32-E, designed by Hackster and DFRobot for learning IoT development with Arduino. The kit includes sensors, actuators, an audio player with speaker, and an I/O shield — everything needed to build connected projects right out of the bo...

SKU: DF-TEM2022C-EN-1

The Hackster and DFRobot EEDU Environmental Sensor Kit provides everything you need to get started with IoT environmental monitoring using an ESP32-based FireBeetle board. Build practical projects that monitor soil moisture, air quality, and environmental conditions in real time. The kit centres...

SKU: AF-1368

Italian-made precision flat pliers from Hakko, designed for detailed electronics and craft work. The short, flat nose provides excellent control for gripping small components, and the smooth inner jaws won't leave ridge marks on delicate parts. Ergonomic grips are comfortable for extended use. K...

SKU: AF-527

Professional-quality wire strippers from Hakko, designed for clean, precise stripping of 20–30 AWG wire. Precision-ground notches strip insulation cleanly without nicking the conductor, and soft rounded grips provide comfortable extended use. Key Features Wire Range – 20 to 30 AWG Blades – Pr...

SKU: AF-1248

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits the FX-888 analog and digital irons, and they're fast to swap, takes only 30 seconds to change out. All the tips are good for either lead or lead free (s...

SKU: AF-1250

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits the FX-888 analog and digital irons, and they're fast to swap, takes only 30 seconds to change out. All the tips are good for either lead or lead free (simp...

SKU: AF-1286

A replacement screwdriver-style soldering tip for Hakko FX-888 series soldering stations. The T18-D24 is a wide chisel tip — 150% wider than the default tip — making it excellent for through-hole soldering, large SMD components, and anything that needs fast heat transfer or has a heat sink attach...

SKU: AF-1249

Upgrade your Hakko with a new tip, you'll get better & faster solder joints and the whole process will be much more enjoyable. This tip fits the FX-888 analog and digital irons, and they're fast to swap, takes only 30 seconds to change out. All the tips are good for either lead or lead free (simp...

SKU: AF-64

This is a cute half size breadboard, good for small projects. It's 2.2" x 3.4" (5.5 cm x 8.5 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as thin as 1.4" (3.5cm) and stick it onto an Arduino protos...

SKU: LB-LS7240-H

Introducing the perfect solution for prototyping - our Half-size Permanent Solder Breadboard PCB! With this board, you can easily transfer your circuit from a solderless breadboard to a more permanent solution without any hassle. Say goodbye to messy wiring and hello to a clean and organized...

SKU: SF-SEN-14709

The AH1815 is an integrated Hall-Effect non-latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely, but can be limited by the glass encapsulation and size. A...

SKU: SF-COM-09312

The US1881 is a latching Hall effect sensor in a TO-92 package. When exposed to a magnetic field above the operating threshold, the open-collector output latches LOW and stays there until a reversed magnetic field pulls it back HIGH. This makes it ideal for detecting the presence or rotation of m...

SKU: AF-158

Hall effect sensors detect whether a magnet is near. Useful for non-contact/waterproof type switches, position sensors, rotary/shaft encoders. I tried dozens of different hall effect sensors to see which one would work best for the SpokePOV kit (to determine the wheel location) and this one...

SKU: SF-COM-14023

This will be a treat for your ears! The Hamburger Mini Speaker is a 3W economical speaker option for any project needing stand-alone sound. The Hamburger features a built-in lithium polymer battery for portable application, a 3.5mm stereo jack (sorry, iPhone 7 users) and two volume options (qu...

SKU: AF-3663

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need.  Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and whammo! Your header is secur...

SKU: SF-PRT-25233 · MPN: PRT-25233

This basic handheld enclosure is designed for building a comfortable, portable electronics project housing. Its rounded, ergonomic shape makes it suitable for instruments, controllers, sensor packs or other devices that need to be used in the hand.The enclosure is moulded from general purpose ABS...