All Products

SKU: LB-SPEAKER-WHITE

The speaker itself is 3.81m (1.5") in diameter and is perfect for any project where you need an 8Ω impedance, and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (printed wattage on back of speaker may have either value). Being originally designed for ta...

SKU: LB-LS0153G

Green Wire Wrap Wire on Spool 250m 30AWG Wire Wrapping Wire, 30 AWG External Material :PVC PVC insulation, Tinned copper conductor Diameter: 0.5 mm Inner diameter:0.25 mm Length:250 meters Heat-resistant: 80 degrees

SKU: TB-HK7717

These knobs just push on to a standard 0.25 (1/4) shaft. - No more messy screws. - Complete with coloured cap. Specifications Colour / Finish Black Shaft Type 1/4" Flattened Side...

SKU: DF-FIT0628

Does it still bother you that you cannot access the Internet anytime anywhere? Here comes a new mini wireless network card, plug and play. Bring you a fast and stable wireless network!This is a 150M miniature USB WiFi module that fully complies with IEEE 802.11n standard, up to 150Mbs data rate a...

SKU: SF-PRT-28388 · MPN: PRT-28388

This ground loop isolator is a simple inline fix for unwanted hum and noise caused by ground loops in audio setups. Place it between your audio board and the line-in of an amplifier or other compatible audio equipment.The unit is bi-directional, so either side can be used as the input or output. ...

SKU: SS-101020003

A simple momentary push button module in the Grove form factor. When pressed it outputs a HIGH signal; when released it returns to LOW. The button includes a built-in pull-down resistor, so it's ready to use as a digital input straight out of the box. Part of the Seeed Studio Grove ecosystem, it...

SKU: AF-5244

A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch), 4-pin Length – 100 mm Wires – 4 (bare ends) Wire Colours Black – GND Red...

SKU: SS-110060762

Expand your micro:bit with the Grove Inventor Kit – a complete package of sensors, displays, and actuators that connect without soldering. The kit includes a Grove shield that adds plug-and-play Grove ports to your micro:bit, plus 8 carefully selected modules to get you building projects immediat...

SKU: SS-103030195

The Grove Shield for micro:bit is a plug-and-play expansion board that bridges the micro:bit with the Seeed Studio Grove ecosystem. It provides 4 Grove connectors on-board (covering different interfaces) with provision for 4 additional Grove ports, giving access to hundreds of Grove sensors, actu...

SKU: SS-101020023

The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted by the potentiometer.   Features Grove compatible interface Wide supply vo...

SKU: SS-110060024

The Grove Starter Kit for Arduino from Seeed Studio is a beginner-friendly electronics kit built around the Grove modular connector system. It includes a Base Shield with multiple Grove connectors, twelve plug-and-play modules, and a user manual to help you get started quickly — no soldering or c...

SKU: SS-110061283

Raspberry Pi Pico swept the MCU world like a huge wave. Pico born with powerful performance, reasonable price, and comprehensive resources, it will definitely become a great platform for learning and mastering electronic knowledge.   To help you ride this wave, we launched the Grove Sta...

SKU: SS-110010044

The Grove Starter Kit for Seeed Studio XIAO bundles the XIAO Expansion Board with 9 Grove modules and additional components, providing a complete introduction to the XIAO development platform. Designed for beginners, it comes with free online courses to help you get started quickly. The kit cove...

SKU: EF-EF11096

Specially designed to connect to seeed studio sensors, seeed Sudio sensors can be used on sensor:bit, octopus:bit, Wukong or other expansion boards. Only ordinary seeed studio sensors can be connected, IIC devices can not be used.

SKU: AF-4528

A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and match sensors, breakouts, and host boards across different connector standards. ...

SKU: PR-PIM510

A Raspberry Pi-powered plant monitoring system that tracks moisture levels across up to three pots, alerts you when plants need water, and can even automate watering with optional pumps. The kit centres around the Grow HAT Mini, a compact add-on board with a built-in LCD, buttons, buzzer, and lig...

SKU: DF-FIT0453

A GSM antenna with SMA connector and magnetic base for easy mounting on ferrous metal surfaces. The 3 m extension cable uses 174 pure copper construction for low impedance, and the antenna provides 2.5 dBi signal gain across the 900–1800 MHz frequency range. Specifications Frequency Range: 900...

SKU: WS-13460

NOTE: This product is only 2G Compatible! Unfortunately while there are still 2G networks in some parts of America and Europe, there are no longer 2G networks in Australia anymore.Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech supp...

SKU: SF-COM-11951

A small aluminium control knob with markings that go to eleven. Fits potentiometers with a 6mm shaft diameter using a brass insert with a set screw for secure attachment. Specifications Dimensions – 23.6 × 14.2mm Shaft Compatibility – 6mm diameter potentiometer shafts Mounting – Brass insert...

SKU: LB-LR0044

This compact MPU-6050 module combines a MEMS accelerometer and MEMS gyroscope in a single chip for detecting movement, tilt and rotation across the X, Y and Z axes.Each channel is captured with 16-bit analogue-to-digital conversion, allowing the module to read the accelerometer and gyro axes at t...