All Products

SKU: AF-2491

The ESP-12S is a compact WiFi module based on the ESP8266 processor from Espressif. Running at 80 MHz with a full WiFi front-end (client and access point modes) and built-in TCP/IP stack with DNS support, it's designed for embedding directly into custom PCB designs. The module features large, ea...

SKU: EL-CQA23809TK

A nostalgic DIY soldering kit that brings the 90s electronic pet experience to life on an ESP8266 platform. Built around a Wemos D1 Mini and an SSD1306 OLED screen (128 × 64 pixels), your digital pet can eat, sleep, and poop — just like the original, but with way more pixels. The kit includes al...

SKU: EC-DTE03012B

This development board is based on ESP8266, it transmits data through the USB interface. The WiFi communication supports python language, makes it possible for you master the communication technology of 8266 module. This microPython development supports Lua and MocroPython development languages a...

SKU: DF-TEL0092

Wifi Bee-ESP8266 is a Serial-to-WIFI module using XBEE design in a compact size, compatible with XBEE slot, applicable to a variety of 3.3V single-chip system. It can be used for Arduino, wireless data transfer, remote control. On-board switch can be used to easily select the Startup module...

SKU: LB-LR0214-80A

ESP-12F: breakthrough design, there are new breakthroughs. The new four-layer board design, the new revision antenna RF performance optimisation, compared to the communication from the ESP-12E increased by 30% to 50%! Semi-hole chip technology, the whole IO leads, with metal shielding shell, has ...

SKU: LB-LS0537

The DT-06 is a compact Wi-Fi-to-TTL serial module based on the ESP8285 — essentially an ESP8266 with 1 MB of built-in SPI flash. It provides a simple way to add Wi-Fi connectivity to any microcontroller project via a UART serial interface, using AT commands or custom firmware. The module support...

SKU: AF-4677

The ESP-PSRAM64H is a 64 Mbit (8 MB) serial pseudo SRAM chip in a compact SOIC-8 package. It provides fast, unlimited read/write external memory for microcontrollers like the ESP32 and Teensy 4.1, which have dedicated PSRAM pads or memory-mapping support for seamless integration. Unlike flash or...

SKU: SF-WRL-25497

The Espressif Thread Border Router combines Espressif's Wi-Fi and 802.15.4 SoCs to bridge Thread mesh networks with IP-based networks. Built on ESP-IDF and the open-source OpenThread stack, it has obtained Thread 1.3 Certified Component certification and supports Matter application scenarios. Ke...

SKU: SF-COM-26983 · MPN: COM-26983

This highly integrated Espressif Wi-Fi system-on-chip is designed for compact Internet of Things hardware that needs reliable 2.4GHz wireless networking with efficient power usage.The ESP8266EX can run as a standalone application processor or operate as a Wi-Fi adapter for a host microcontroller ...

SKU: SF-WRL-25498

A Sub-Ethernet daughter board which works with the ESP Thread Border Router board to extend an Ethernet interface. This allows you to use Ethernet with the fully featured Thread Border Router.

SKU: SF-PGM-25003 · MPN: PGM-25003

The Espressif Module Prog-1 is a dedicated programmer for flashing ESP32 modules without soldering. It uses spring pins to make a secure, swappable connection to supported modules, making it handy for development, testing or small production runs.To use it, place a compatible ESP32 module onto th...

SKU: AF-1887

Try the JavaScript of things with the Espruino - the world's first open-source JavaScript microcontroller! This little board has an STM32 microcontroller pre-programmed with Espruino all ready to go so you can start playing with Javascript-microcontrollers. Warning: if you only use Assembly an...

SKU: PI-ESP001

A tiny USB stick that runs JavaScript - control things in the real world in just seconds! The Espruino Pico is a tiny USB stick that runs JavaScript code (it doesn't need to be plugged into a computer). You can program it with nothing but a serial terminal program, but there's also an IDE that...

SKU: AF-3372

The Espruino Puck.js is a low energy Bluetooth smart button that can be programmed and debugged wirelessly with JavaScript. It is both multi-functional and easy to use, with a custom circuit board, the latest Nordic chip, Bluetooth LE, NFC, magnetometer, temperature sensor, RGB LEDs,&n...

SKU: EC-DLC35020S

This handheld terminal is based on the ESP32 controller, equipped with a powerful ESP32-S3 chip, and supports 2.4GHz Wi-Fi and Bluetooth 5 (LE), providing more powerful computing and processing capabilities for IoT terminal applications. It is suitable for various scenarios, such as industrial...

SKU: EC-WCW32110W

The ESP-WROOM-32 is Espressif's powerful Wi-Fi, Bluetooth Classic, and BLE module built around the ESP32 dual-core processor. It's a versatile platform for IoT applications ranging from low-power sensor networks to demanding tasks like voice encoding, music streaming, and MP3 decoding. This is t...

SKU: PI-IFIX-EU145348-2

The iFixit Essential Electronics Toolkit has everything you need to get started with electronics repair — from screen replacements and battery swaps to servicing home appliances, eyeglasses, and door hardware. All tools are neatly organised in a magnetised case with a built-in sorting tray lid. ...

SKU: SF-TOL-19766 · MPN: TOL-19766

These flat end mills are made for roughing and machining flat or prismatic parts on a compatible CNC mill or router.Each pack includes two cutters, giving you a spare for workshop use or a matched pair for repeat jobs. The tools use a 0.125" shank and 0.125" flute diameter, making them suitable f...

SKU: SF-TOL-19768 · MPN: TOL-19768

These V-bit cutters are made for engraving intricate patterns and fine details, especially where a sharp 90° V profile is useful. They work well with the V-carve feature in Carbide Create for sign making, decorative engraving and detailed CNC work.Each pack includes two cutters. The bits use an H...

SKU: SF-TOL-19769 · MPN: TOL-19769

These V-bit cutters are made for engraving intricate patterns and fine detail work, especially when using the V-carve feature in Carbide Create.The pack includes two cutters, giving you a spare on hand for CNC engraving and carving jobs.If you have, or are purchasing, a Nomad, make sure you also ...