Pimoroni
Zero4U
All Products
New Arrivals
Raspberry Pi
Brands and Manufacturers
Raspberry Pi Accessories
Prototyping & Wiring
Raspberry Pi Zero
$27.73
|
Out of stock
This is a 4-port USB 2.0 hub for Raspberry Pi Zero, and it can be mounted to Raspberry Pi Zero back-to-back. The 4 pogo pins on the back will connect the ...
Estimated Delivery
Arrives
Disclaimer
Secure checkout
This is a 4-port USB 2.0 hub for Raspberry Pi Zero, and it can be mounted to Raspberry Pi Zero back-to-back.
The 4 pogo pins on the back will connect the PP1, PP6, PP22 and PP23 testing pads on Raspberry Pi Zero, hence no soldering will be needed.
UPDATE: as of 23rd March 2017 all Zero4U now ship with a ferrite ring to prevent instability caused by the wifi on the new Zero W. See here for more information
The USB hub will take power directly from your Raspberry Pi Zero, so you don’t need to power the USB hub separately. However you can use the JST XH2.54 connector on board as the alternative power input port.
The blue LED on board works the power indicator, and lights up when power is connected.
Each USB port has a dedicated white LED as transaction indicator, and a dedicated electrolytic capacitor to help stabilizing the output voltage.
If you use this USB hub with other types of computer, you can use a USB cable (not included) to connect the mini-USB port on board to the up-stream USB port.
Contents
- 4-port USB hub board x 1
- plastic spacer x 4
- M2.5 plastic screw x 4
- M2.5 plastic nut x 4
Please note: This version of Zero4U only works with Raspberry Pi Zero V1.3 (with camera connector)
SPECIFICATIONS
- Dimension: 65mm x 30mm x 9mm
- Weight: 14 g (net weight without any accessory)
- Power Mode: Bus-Power / Self-Power
- Standards: USB 2.0 and 1.1 compatibility
- Working Voltage: 5V DC
- Static Current: 1mA
- Maximum Output Current: 2A for all ports in self-power mode, 500mA for all ports in bus-power mode
- Operating Temperature: 0°C~70°C
- Storage Temperature: -20°C~80°C
- Humidity: 0~80%RH, no condensing
Jargon buster
Plain-language definitions for the technical terms used above.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- M2.5
- A metric screw thread size with a 2.5 mm nominal diameter. It matters for mounting because screws, standoffs, and holes must use the same size to fit securely without damaging the board.
Find this product in
Raspberry Pi
Related Tutorials
Free guides on learn.littlebird.com.au
