DescriptionThis is the cutest little microSD card reader/writer - but don't be fooled by its adorableness! It's wicked fast and supports up to 64 GB SDXC cards! Simply slide the card into the edge and plug it into your computer. No drivers are required, it shows up as a standard 'Mass Storage' device under any OS. You can swap cards while the USB port is kept plugged in.
Comes with a handy little cord so you can attach it to your datalogger project. Also has a little plastic cover for the USB A connector part so it won't short against nearby electronics.
Max read speed is 16 MB/sec, max write speed is 6 MB/sec - most microSD cards are not this fast so the bottleneck will be the card, not the reader
Does not come with a microSD card! Adafruit do carry microSD cards in the shop that go great with the reader.
- Dimensions — 0.984" x 0.478" x 0.104" (24.99mm x 12.14mm x 2.64mm)
- Operating Temperature — 0° to 60° C / 32° to 140° F
- Storage temperatures — -40° to 85° C / -40° to 185° F
- Weight — 0.137 oz (3.8g)
- Resizing the Raspberry Pi Boot Partition
- Adafruit Feather 32u4 Adalogger
- Setting up a Raspberry Pi with NOOBS
- Onion Pi
- Setting up a Raspberry Pi as a WiFi access point
- Raspberry Pi as a Media Center
- Adafruit's Raspberry Pi Lesson 1. Preparing an SD Card for your Raspberry Pi
- Chumby Hacker Board
- Adafruit Raspberry Pi Educational Linux Distro