Nathaniel Brown
DFRobot
Gravity: DC Micro Metal Gear Motor w/Driver - 75:1
A compact DC micro metal gear motor with a built-in driver that uses the DFRobot Gravity 3-pin interface. Simply connect to a microcontroller and control dir...
Get notified when back in stock
A compact DC micro metal gear motor with a built-in driver that uses the DFRobot Gravity 3-pin interface. Simply connect to a microcontroller and control direction and speed with a single PWM signal — no external H-bridge required.
The embedded driver accepts standard servo-style PPM signals, so you can use the Arduino Servo library to control forward/reverse direction and speed. The motor features a 75:1 gear reduction ratio and draws less than 1 mA in standby when no control signal is present.
Key Features
- Built-In Driver – No external H-bridge needed, single signal control
- Gravity 3-Pin Interface – Simple plug-and-play connection
- 75:1 Gear Ratio – High torque from a compact motor
- Forward/Reverse Control – Via PPM pulse width
- Speed Control via PWM – Variable speed in both directions
- Low Standby Current – Less than 1 mA without signal input
- Arduino Servo Library Compatible – Supports up to 12 motors on most boards, 48 on Mega
Specifications
- Operating Voltage: 3.5–8 V
- Reduction Ratio: 75:1
- No-Load Current: ~40 mA @ 6 V
- Static Current: < 1 mA (no signal)
- Interface: Gravity 3-Pin
- PPM Signal Resolution: 1 µs
- PPM Pulse Width Range: 500–2500 µs
- Clockwise: 500–1400 µs (500 µs = max speed)
- Stop Range: 1400–1600 µs
- Anticlockwise: 1600–2500 µs (2500 µs = max speed)
- PWM Frequency: 500 Hz
Ideal For
- Small robotics and DIY motorised projects
- Beginners learning motor control
- Compact mechanisms requiring forward/reverse drive
Package Contents
- 1× DC Micro Metal Gear Motor w/Driver (75:1)
- 1× Gravity 3-Pin Cable
Resources
Find this product in
Brands
Robotics & Motion
DC Micro Metal Gear Motor with Driver Dimensions
Mechanical Drawings · 203.4 KB · Click any page to view full size
Supplier page — dfrobot.com
Supplier Description · 418.9 KB · Click any page to view full size
DFR0399 gravity dfr0399 micro metal dc geared motor module dimension 1.0
Mechanical Drawings · 203.4 KB · Click any page to view full size
Related Tutorials
Free step-by-step guides
You might also like
Customers who bought this also bought
Mecanum Wheel (48mm) Kit (4 Wheels)
$28.20
Proto Screw Shield-Assembled (Arduino Compatible)
$16.35
Kitronik Compact All-In-One Robotics Board for BBC micro:bit
$29.85
12v JGA25-370 DC speed reduction motor 280 RPM
$8.80
12v JGA25-370 DC speed reduction motor 60 RPM
$8.80
MG996 Servo 180° Metal Gear
$8.80
Motor:bit for Micro:bit
$17.60
Battery Holder - 2x18650 (wire leads)
$3.95
Jargon buster
Plain-language definitions for the technical terms in the product description.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- Gravity
- Gravity is DFRobot’s plug-in connector system for sensors, motors and modules, using standard cables to reduce loose jumper wiring. It matters because Gravity-compatible parts can connect directly to these ports, while non-Gravity parts may need adapters or manual wiring.
- microcontroller
- A microcontroller is a small computer on a single chip that runs a stored program and controls connected inputs and outputs such as buttons, sensors, displays and communication interfaces. In a device built around one, it is the part that executes the code and coordinates the device's behaviour.
- ppm
- ppm means parts per million, a common way to express very small gas concentrations in air. For CO₂ sensors, the ppm range tells you what levels the sensor can measure, such as normal indoor air through to poorly ventilated spaces.
- Pulse width range
- The span of control pulse lengths a servo understands, usually measured in microseconds. Matching this range in your code affects how far the servo moves and helps avoid commanding positions outside its intended travel.
- PWM
- Pulse Width Modulation is a way for a digital pin to simulate variable output power by switching on and off very quickly. It matters for controlling things like LED brightness, motor speed, or servo-style signals from a microcontroller pin.
- servo
- A servo is a motor with built-in position control, usually told to move to a specific angle by a control signal. It matters when you need repeatable movement, such as steering, arms, flaps, or linkages, rather than continuous spinning.
- Torque
- A twisting force that causes something to rotate, usually measured in newton-metres or kilogram-centimetres. It matters when choosing motors, servos, gears, and tools because higher torque is needed to lift heavier loads, turn larger wheels, or move mechanisms without stalling.