Adafruit
Female-Female 2.54 to 2.0mm Jumper Wires x 40
These female-to-female jumper wires bridge the gap between standard 2.54 mm (0.1″) pitch headers and smaller 2.0 mm (0.08″) pitch connectors. One end has a 2...
Get notified when back in stock
These female-to-female jumper wires bridge the gap between standard 2.54 mm (0.1″) pitch headers and smaller 2.0 mm (0.08″) pitch connectors. One end has a 2.54 mm socket and the other has a 2.0 mm socket, making it easy to connect 2.0 mm-pitch devices like XBee modules to breadboards and standard headers.
The 40-wire ribbon strip is approximately 200 mm (8″) long. Individual wires can be peeled apart for single connections, or kept together for neat, organised harnesses.
Key Features
- Mixed Pitch – 2.54 mm socket on one end, 2.0 mm socket on the other
- 40 Wires – Supplied as a peelable ribbon strip
- ~200 mm Length – Approximately 8 inches (may vary slightly)
- Female-to-Female – Pairs of 2.54 mm sockets to a single 2×2.0 mm socket per wire
Ideal For
- Connecting 2.0 mm pitch devices (e.g. XBee) to breadboards
- Making wire harnesses between mixed-pitch components
- Prototyping with non-standard header spacing
Package Contents
- 1× Ribbon strip of 40 female-female jumper wires (2.54 mm to 2.0 mm)
Jargon buster
Plain-language definitions for the technical terms used above.
- Headers
- Rows of connector contacts on a fixed pitch (commonly 2.54 mm) used to link a board to a breadboard, jumper wires, or another board. They come as male pin headers and female socket headers; when a module ships with pre-soldered headers it can be used straight away, whereas bare pads require soldering the pins yourself.
Find this product in
Prototyping & Wiring
Related Tutorials
Free guides on learn.littlebird.com.au
