Diode Rectifier - 1A, 400V (1N4004)

Jargon buster

Plain-language definitions for the technical terms used above.

1N4004

A common part number for a general-purpose silicon rectifier diode. The part number tells you its current and voltage ratings, so you can check whether it is suitable for power-supply, protection, or rectification circuits.

Axial

Axial components have one lead coming out of each end, so they lie flat or span holes on a circuit board or breadboard. This matters when checking whether the resistor will physically fit your prototyping or through-board assembly method.

DC

DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.

DO-41

A standard through-hole package size used for many small rectifier diodes. Knowing the package helps you check whether the part will physically fit your breadboard, stripboard, or PCB layout.

Forward voltage drop

Forward voltage drop is the small amount of voltage lost across a diode or diode-like circuit when current flows through it. A lower drop is important because it wastes less power and helps keep the rest of the project supplied with enough voltage.

peak reverse voltage

The maximum reverse voltage a diode can block without breaking down. This matters in power supplies and protection circuits because the diode must withstand the highest voltage it may see when it is not conducting.

rectifier diode

A diode designed to let current flow mainly in one direction, often used to convert AC into DC or to protect circuits from reverse current. It matters because rectifier diodes are chosen for power handling rather than fast signal switching.

reverse polarity protection

A circuit feature that helps protect the board if power is connected the wrong way around. It matters because it can reduce the chance of damaging the breakout during wiring mistakes, especially in classroom or prototyping use.

through-hole

A mounting style where the component leads pass through holes in a circuit board and are soldered on the other side. Through-hole parts are often easier to handle and solder by hand, which is useful for classroom and hobby projects.