DFRobot
Brushless DC Motor with Encoder 12V 159RPM
INTRODUCTION This is a motor revolution: a new DC brushless motor with built-in motor driver. It can be conncected to Arduino directly without exte...
INTRODUCTION
This is a motor revolution: a new DC brushless motor with built-in motor driver. It can be conncected to Arduino directly without external motor driver. Whatsmore, the motor comes with directional control, PWM speed control and speed feedback output, which make this motor to be controlled easily. This product is convenient for mobile robotic platform since there is less drive pin and less MCU resource consumption.
SPECIFICATIONS
- Operating Voltage: 12V
- Stall current: 0.7A
- Motor rated speed: 7100-7300rpm
- Blocking torque:2.4kg*cm
- Speed: about 159 rpm/min.
- Reduction ratio: 45:1
- Signal cycle pulse number: 6*45
- Control mode:
- PWM speed control
- Direction control
- Feedback pulse output
DOCUMENTS
SHIPPING LIST
- Brushless DC Motor with Encoder x1
Jargon buster
Plain-language definitions for the technical terms used above.
- encoder
- A device attached to a motor or shaft that reports movement, such as rotation steps or position. In a pump system, an encoder can help measure or control how much the motor has turned, which affects how repeatable the watering amount can be.
- motor driver
- An electronic circuit that lets a low-power controller switch and control a motor that needs more current than the controller pins can safely provide. Checking motor driver support matters because pumps and motors usually cannot be connected directly to a microcontroller output.
- PWM
- Pulse Width Modulation is a way for a digital pin to simulate variable output power by switching on and off very quickly. It matters for controlling things like LED brightness, motor speed, or servo-style signals from a microcontroller pin.
- Torque
- A twisting force that causes something to rotate, usually measured in newton-metres or kilogram-centimetres. It matters when choosing motors, servos, gears, and tools because higher torque is needed to lift heavier loads, turn larger wheels, or move mechanisms without stalling.
Find this product in
Robotics & Motion
Supplier page — dfrobot.com
Supplier Description · 324.9 KB · Click any page to view full size
Related Tutorials
Free guides on learn.littlebird.com.au
