Adafruit
Adafruit VL6180X Time of Flight Distance Ranging Sensor (VL6180)
·
The Adafruit VL6180X is a close-range Time-of-Flight (ToF) distance sensor from ST that measures from approximately 5 mm to 100 mm (up to 150–200 mm in good ...
Get notified when back in stock
The Adafruit VL6180X is a close-range Time-of-Flight (ToF) distance sensor from ST that measures from approximately 5 mm to 100 mm (up to 150–200 mm in good conditions). It also includes a built-in ambient light sensor (lux), making it a versatile two-in-one module for proximity and light measurement.
Using an invisible laser and matching sensor, the VL6180X precisely times how long light takes to bounce back — delivering accurate readings without the linearity issues of IR reflectance sensors or the wide cone of ultrasonic sensors. The breakout includes a 2.8V regulator and level shifting for 3–5V compatibility.
Key Features
- Close-Range ToF Sensing – ~5 to 100 mm range (up to 150–200 mm in ideal conditions)
- Built-in Lux Sensor – Ambient light measurement included alongside distance sensing
- Narrow Sensing Cone – Focused invisible laser measures only the surface directly ahead
- I2C Interface – Simple two-wire communication; most processing handled on-chip
- 3–5V Compatible – On-board 2.8V regulator and level shifting
- Compact Breakout – Small PCB suitable for robotics and interactive projects
Compared To Other ToF Sensors
- vs VL53L0X – The VL53L0X covers ~50–1200 mm for longer-range needs but lacks the lux sensor
- vs VL53L4CD – The VL53L4CD covers ~1–1300 mm, combining close and medium range without a lux sensor
Ideal For
- Close-range proximity detection (gesture sensing, paper detection)
- Robotics obstacle detection at short distances
- Combined distance and ambient light sensing
- Interactive installations and touch-free interfaces
Package Contents
- 1× Adafruit VL6180X ToF Distance Sensor Breakout (assembled and tested)
- 1× Header strip (requires soldering)
Resources
- Adafruit VL6180X Tutorial – Code, schematics, wiring diagrams, and more
Find this product in
Brands
Related Tutorials
Free step-by-step guides
You might also like
Customers who bought this also bought
Raspberry Pi 4 Aluminium Alloy Case With Cooling Heatsink
$15.45
Gravity: VL53L0X ToF Laser Range Finder
$22.50
Hobby Knife with 3 extra blades
$2.75
VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor - GY-530
$3.30
YDLIDAR GS2 - Linear Array Solid State LiDAR Sensor(25-300mm)
$70.70
Fermion: VL6180X ToF Distance Ranging Sensor (5-100mm) (Breakout)
$16.50
Fermion: SHTC3 Temperature & Humidity Sensor (Breakout)
$8.80
Tiny RTC For Arduino
$3.75
Jargon buster
Plain-language definitions for the technical terms in the product description.
- Ambient light sensor
- A sensor that measures the general brightness of light falling on it, similar to how a device can adjust screen brightness automatically. It matters when you want a project to react to room lighting, daylight, shadows, or covered/uncovered conditions.
- breakout
- A breakout board carries a small or fine-pitched component and brings its connections out to standard, breadboard- and header-friendly pins. Describing a part as a breakout means it can be wired into a project without soldering directly to the component's tiny contacts.
- I2C
- I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
- lux
- Lux is the standard unit for measuring how much light falls on a surface, similar to how a light meter reports brightness. A sensor that outputs lux gives readings that are easier to compare between rooms, outdoor conditions, and different projects.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.