Adafruit
Adafruit Ultimate GPS Breakout with GLONASS + GPS - PA1616D
All Products
Breakouts
GPS & Location Sensors
New Arrivals
Sensors
Adafruit
Brands and Manufacturers
Sensors & Modules
Sensors & Input
Wireless & Connectivity
Connectivity
Prototyping & Wiring
$58.43
|
In stock at supplier
The Adafruit Ultimate GPS Breakout with GLONASS + GPS is an enhanced version of the popular Ultimate GPS, built around the MTK3333 chipset with PA1616D modul...
Estimated Delivery
Arrives
Disclaimer
Secure checkout
The Adafruit Ultimate GPS Breakout with GLONASS + GPS is an enhanced version of the popular Ultimate GPS, built around the MTK3333 chipset with PA1616D module. It supports both GPS and GLONASS satellite networks, tracking up to 33 satellites on 99 channels for improved coverage and accuracy worldwide.
With -165 dBm tracking sensitivity, up to 10 Hz position updates, and only ~29 mA current draw during navigation, this breakout delivers excellent performance for demanding location projects. It includes external antenna support via a u.FL connector, built-in datalogging, PPS output, and RTC battery backup.
Key Features
- GPS + GLONASS Support – Dual constellation tracking for better coverage and faster fixes
- 99-Channel Receiver – Tracks up to 33 satellites with -165 dBm sensitivity
- 10 Hz Updates – Up to 10 position updates per second for high-speed tracking
- Low Power – Approximately 29 mA current draw during navigation
- 5V Friendly – Built-in 3.3V regulator accepts 3.3–5V DC input with 5V-safe logic levels
- Dual Antenna Support – Internal ceramic patch antenna plus u.FL connector for external active GPS antenna (auto-switching)
- Built-in Datalogging – Logs time, date, longitude, latitude, and altitude every 15 seconds to internal FLASH (approx. 16 hours of storage)
- PPS Output – Pulse-Per-Second signal output on GPS fix
- RTC Battery Backup – Footprint for CR1220 coin cell enables warm starts
- ENABLE Pin – Turn the module on/off via any microcontroller pin or switch
- Fix Status LED – Blinks at 1 Hz while searching, once every 15 seconds when fix is acquired
- Breadboard Friendly – Standard 0.1" header spacing with two mounting holes
Ideal For
- GPS/GLONASS tracking and datalogging projects
- Drone and robotics navigation
- Outdoor and vehicle location systems
- Applications requiring improved satellite coverage (e.g. urban canyons)
- Time-synchronisation applications using PPS output
Package Contents
- 1× Adafruit Ultimate GPS Breakout with GLONASS (fully assembled and tested)
- 1× CR1220 coin cell holder (battery not included)
Note: NMEA sentences will start with
$GN instead of $GP when both GPS and GLONASS are available. Antenna query commands differ from the classic MTK3339 version — check the datasheet for details.
Tip: Looking for just the module without the breakout board? Check out the Ultimate GPS Module PA1616D.
Resources
- Adafruit Ultimate GPS Learning Guide – Wiring, datalogging, example code for CircuitPython & Arduino
Jargon buster
Plain-language definitions for the technical terms used above.
- 3.3V regulator
- A 3.3V regulator is a power circuit that provides a steady 3.3 volts for parts that need that supply voltage. On a breakout board, it can let the sensor run safely even when the connected microcontroller or power source uses a higher voltage.
- breakout
- A breakout is a small circuit board that makes a tiny or hard-to-solder component easier to connect to with standard pins. It matters because this OLED module can be wired into a microcontroller project without needing to solder directly to the display’s fine contacts.
- CircuitPython
- A beginner-friendly version of Python designed to run directly on microcontroller boards. If a product supports CircuitPython, you can often program it by copying code files onto the board rather than setting up a more complex toolchain.
- GLONASS
- Russia’s satellite navigation system. A receiver that can also use GLONASS has more satellites to choose from, which can improve positioning reliability when the sky view is partly blocked.
- GPS
- The US satellite navigation system used by GNSS receivers to calculate position and time. Support for GPS is important because it is widely available and often used together with other constellations for more reliable positioning.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- microcontroller
- A microcontroller is a small computer on a chip that runs your program and controls connected inputs and outputs. For this product, it is the part that reads buttons and sensors, drives the display and speaker, and communicates over Bluetooth.
- RTC
- A Real-Time Clock keeps track of time even when the main processor is asleep or powered down, usually with a small backup battery. It matters for data logging and tracking projects that need accurate timestamps.
- u.FL
- u.FL is a tiny snap-on antenna connector often used on compact wireless boards. A board with u.FL usually needs an external antenna, which matters if the product will be inside an enclosure or needs better antenna placement.
Find this product in
Brands
Sensors & Input
Related Tutorials
Free guides on learn.littlebird.com.au
