DFRobot
9g 270°Metal Servo with Analog Feedback (1.5kg)
A 9g micro servo with an extended 270° rotation range, metal gears, and built-in analog feedback (0–3.3V). The wider rotation range makes it suitable for app...
Get notified when back in stock
A 9g micro servo with an extended 270° rotation range, metal gears, and built-in analog feedback (0–3.3V). The wider rotation range makes it suitable for applications requiring more travel than a standard 180° servo, while the analog feedback signal enables closed-loop position control via an MCU.
The compact 22.9 × 12.2 × 32.5mm body fits into tight spaces while delivering up to 1.5 kgf·cm of torque at 6V. Includes four interchangeable servo horns. Compatible with Arduino servo libraries.
Key Features
- Metal Gears – More durable than plastic gear versions
- Analog Feedback – 0–3.3V position signal for closed-loop MCU control
- 270° Rotation – Extended range within 500–2500μs pulse width
- Compact 9g Design – Fits into tight spaces
- Arduino Compatible – Works with standard servo libraries
Specifications
- Operating Voltage – 4.8–6V DC
- Operating Travel – 270° ±5°
- Stall Torque – 1.3 kgf·cm (4.8V) / 1.5 kgf·cm (6V)
- Speed (No Load) – 0.12 sec/60° (4.8V) / 0.10 sec/60° (6V)
- Pulse Width Range – 500–2500μs
- Neutral Position – 1500μs
- Static Current – ≤40mA
- No-Load Current – 200mA (4.8V) / 220mA (6V)
- Stall Current – ≤800mA (4.8V) / ≤1100mA (6V)
- Dimensions – 22.9 × 12.2 × 32.5mm
- Weight – 12g
Also Available
- 9g 180° Metal Servo with Analog Feedback – Standard rotation range
- 9g 300° Clutch Servo – With clutch and stall protection
Package Contents
- 1× 9g 270° Metal Servo with Analog Feedback
- 4× Servo Horns
Find this product in
Brands
Robotics & Motion
Supplier page — dfrobot.com
Supplier Description · 1.6 MB · Click any page to view full size
You might also like
Customers who bought this also bought
Assembled Standard LCD 16x2 + extras - White on Blue
$22.00
JST 2-pin Extension Cable with On/Off Switch - JST PH2
$6.00
Adafruit VL53L0X Time of Flight Distance Sensor - ~30 to 1000mm
$26.80
Raspberry Pi Pico WH
$12.95
Elecrow Electronic Kit Bundle with Breadboard Cable Resistor, Capacitor, LED, Potentiometer
$16.55
Continuous Rotation Micro Servo [FS90R]
$15.05
Nano V3.0 FT232 Chip with USB Cable
$10.20
IR Flame Sensor Module
$1.80
Jargon buster
Plain-language definitions for the technical terms in the product description.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- Pulse width range
- The span of control pulse lengths a servo understands, usually measured in microseconds. Matching this range in your code affects how far the servo moves and helps avoid commanding positions outside its intended travel.
- servo
- A servo is a motor with built-in position control, usually told to move to a specific angle by a control signal. It matters when you need repeatable movement, such as steering, arms, flaps, or linkages, rather than continuous spinning.
- Stall torque
- The maximum twisting force a servo can produce when its output is held still and cannot move. It helps you judge whether the servo is strong enough for a robot joint, steering linkage, or other load.
- Torque
- A twisting force that causes something to rotate, usually measured in newton-metres or kilogram-centimetres. It matters when choosing motors, servos, gears, and tools because higher torque is needed to lift heavier loads, turn larger wheels, or move mechanisms without stalling.