Adafruit
6-pin JST SM Plug + Receptacle Cable Set
All Products
Headers & Connectors
New Arrivals
Adafruit
Raspberry Pi Pico Cables and Connectors
Brands and Manufacturers
Jumpers & Wires
Prototyping
Components
Prototyping & Wiring
$3.29
|
Out of stock
A matched pair of 6-wire cables with JST SM connectors — one plug and one receptacle. The latching connector provides a secure, compact connection that won't...
Estimated Delivery
Arrives
Disclaimer
Secure checkout
A matched pair of 6-wire cables with JST SM connectors — one plug and one receptacle. The latching connector provides a secure, compact connection that won't pull apart easily. Great for any project where you need a reliable 6-conductor plug-and-unplug connection.
Key Features
- Matched Plug + Receptacle Set – One of each connector included
- Latching Connector – Secure fit that resists accidental disconnection
- 6 Conductors – 22 AWG wires for reliable signal and power connections
- Compact Design – Low-profile JST SM connectors
Specifications
- Length – 162mm (6.4″) per cable
- Conductors – 6
- Wire Gauge – 22 AWG
- Connector Type – JST SM (plug on one cable, receptacle on the other)
Ideal For
- LED strip and NeoPixel connections
- Removable sensor and motor wiring
- Any project needing a reliable 6-wire disconnect
Package Contents
- 1× 6-pin JST SM plug cable
- 1× 6-pin JST SM receptacle cable
Jargon buster
Plain-language definitions for the technical terms used above.
- AWG
- American Wire Gauge is a numbering system for wire thickness, where a lower number means a thicker wire. The AWG rating matters because thicker wire can usually carry more current with less voltage drop and heating.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- NeoPixel
- A type of addressable LED system where colour data is sent along a single digital data line from one LED or controller to the next. Compatibility matters because the timing and signal format must match for the lights or driver board to respond correctly.
Find this product in
Brands
Prototyping & Wiring
