Elecrow
3.5 Inch TFT Color Screen Module 320 X 480 Support Arduino UNO Mega2560
A 3.5" TFT colour display shield with 320×480 resolution that plugs directly onto Arduino UNO and Mega2560 boards — no wiring required. Also compatible with ...
Get notified when back in stock
A 3.5" TFT colour display shield with 320×480 resolution that plugs directly onto Arduino UNO and Mega2560 boards — no wiring required. Also compatible with Arduino Due, STM32, and other common microcontrollers. Open-source Arduino library files are available for quick development.
Key Features
- 3.5" TFT Display – 320×480 pixel resolution with full-colour output
- Direct Plug-In – Shield form factor fits Arduino UNO and Mega2560 without extra wiring
- 5 V Operation – Powered directly from the Arduino board
- Always-On Backlight – Connected to 3.3 V (not software-controllable)
- Open-Source Libraries – Arduino demo code and libraries available
Compatibility
- Arduino UNO
- Arduino Mega2560
- Arduino Due
- STM32 and other common microcontrollers
Specifications
- Resolution – 320 × 480 pixels
- Operating Voltage – 5 V DC
- Backlight – Always on (connected to 3.3 V)
Ideal For
- Arduino-based GUI and display projects
- Rapid prototyping with colour output
- Data visualisation on embedded systems
Package Contents
- 1× 3.5" TFT Colour Screen Shield
Find this product in
Brands
Displays & Screens
Related Tutorials
Free step-by-step guides
You might also like
Customers who bought this also bought
Uno R3 - Little Bird
$19.55
Ultra-thin speaker 4 ohms 3 watt
$3.50
Arduino DMX Shield
$33.15
3.5inch Resistive Touch Display (B) for Raspberry Pi, 480×320, IPS Screen, SPI
$36.20
Raspberry Pi Zero 2 WH - with soldered headers
$34.85
0.96" 7pin 128X64 OLED Display Module White
$4.95
Arduino UNO R4 WiFi
$74.15
Raspberry Pi Pico RTC Module Onboard DS3231 Chip
$40.45
Jargon buster
Plain-language definitions for the technical terms in the product description.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- Shield
- An add-on board that plugs into a main controller board to give it extra features such as sensing, motor control or communication. Knowing a product supports shields helps you judge whether it can connect neatly into an existing maker-board setup.
- STM32
- STM32 is a family of microcontroller chips commonly used in embedded electronics. Knowing a product uses an STM32 can help when looking at firmware updates, pin connections, or low-level serial control options.
- TFT
- A thin-film transistor display is a common type of colour LCD used for graphics screens. Knowing a product is for TFTs helps you check that the driver board matches the display’s connector, resolution, backlight, and signalling method.