The Pico-LoRa-SX1262-XXXM is LoRa node expansion module designed for Raspberry Pi Pico based on SX1262 with better performance than the SX127X series. The LoRa modulation technology solves the balancing problem between transmission distance, interference immunity, and power consumption that traditional solutions aren't able to deal with.
It supports LoRaWAN protocol, which allows it to connect the TTN, ChirpStack servers through a LoRa gateway to use LoRa Cloud service fast and easily.
Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
Supports LoRaWAN protocol, different frequency bands are available
Adopts active temperature compensation crystal oscillator, ensuring stable long-term operating in extreme high/low temperature conditions
Supports FSK, GFSK, LoRa modulations, outstanding block resistance and ultra long communication distance
High receiving sensitivity (up to -148dBm), programmable emitting power (up to 22dBm)
Supports preamble detection, with CRC, up to 256 bytes data packet engine
Comes with development resources and manual (example in C)
Specifications
FREQUENCY BAND433M (410~525MHZ)868M (863~870MHZ)915M (902~930MHZ) RFID | SX1262 Emiting power | 22dBm Emiting current | 107mA@22dBm | 118mA@22dBm Receiving current | 5.3mA@125KHz Modulation | LoRa/(G)FSK Operating voltage | 3.3V Communication bus | SPI Operating temperature | -40 ~ 85℃ Dimensions | 21.00 × 52.00mm
Raspberry Pi Pico Header Compatibility
Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico
Raspberry Pi Pico is NOT included.
What's On Board
Raspberry Pi Pico header
Status indicators PWR: power indicator CHG: recharge indicator
RF switch control A: controlled by high level B: controlled by GPIO22
MCP73831 recharge IC
SX1262 module
IPEX 1 antenna connector
Power switch
PH1.25 battery header
Pinout Definition
Application Examples
Industrial Control, Intelligent Home, And Data Acquisition...
