Wearable Tech & E-textiles

SKU: SF-SEN-10264 | Brand: SparkFun

A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Gl...

SKU: LB-EAGLED-MOMENTARY | Brand: Little Bird

A pack of 10 low-profile momentary push buttons designed for e-textile and wearable electronics projects. Each button features large sewing holes and flat connection pads with no sharp edges, making them comfortable t...

SKU: LB-JSTBOARD | Brand: Little Bird

This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply coppe...

SKU: LB-LR0335-V | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant purple when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow simil...

SKU: LB-BUZZER | Brand: Little Bird

This is a small buzzer for use with E-Textiles. Use 2 I/O pins on the Buzzer main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusi...

SKU: LB-LR0281-5-O | Brand: Little Bird

This 5m length of EL wire (electroluminescent wire) is a flexible wire coated with phosphor which glows orange when applied with the appropriate voltage. Whilst EL wire looks similar to a thin neon tube, the wire is i...

SKU: LB-LS0239 | Brand: Little Bird

This e-textiles ambient light sensor uses the TEMT6000 phototransistor to detect light levels. Designed for wearable electronics, it features a compact 20 mm round PCB that's only 0.8 mm thick — thin enough to sew int...

SKU: LW-TEK7 | Brand: Little Bird

Red Heart-shaped sewable LED board.  Product Details• Add light up LED Hearts to your crafts• LED light is Pink• Pack Includes 4x LED Hearts• Recommended Age 8+

SKU: SF-BOK-14270 | Brand: SparkFun

The full-color LilyPad Sewable Electronics Kit Guidebook contains step-by-step instructions for creating four interactive projects from the materials contained in the kit. Examples and circuits are provided and exp...

SKU: SF-DEV-14011 | Brand: SparkFun

This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-t...

SKU: AF-519 | Brand: Adafruit

Measuring stretch forces isn't easy - unless you have some conductive rubber cord! This cord is 2mm diameter, and 1 meter long, made of carbon-black impregnated rubber. Usually this material is used for EMF gasketing,...

SKU: SF-TOL-10405 | Brand: SparkFun

This sewing needle set is designed for e-textile projects, with eye sizes large enough to easily thread conductive thread. The set includes both large and small needles to suit different stitching needs — from thick f...

SKU: LB-LR0335-R | Brand: Little Bird

A 5-metre length of flexible red EL wire (electroluminescent wire) complete with a battery-powered inverter. EL wire produces a bright, even glow along its entire length – perfect for costumes, props, signage, and dec...

SKU: KI-2726 | Brand: Kitronik

Ultra-slim sewable LED boards from Kitronik in sakura lilac, designed for e-textile and wearable electronics projects. Each LED board runs from a 3V coin cell battery and illuminates continuously when powered. The dou...

SKU: AF-921 | Brand: Adafruit

This blank 13.56 MHz RFID/NFC silicone bracelet contains a Mifare Classic 1K chip with 1 KB of writable EEPROM storage. The embedded chip and antenna are passively powered — no battery is needed. Simply hold the brace...

SKU: LB-LR0335-G | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant green when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow simila...

SKU: AF-1349 | Brand: Adafruit

A really tiny portable inverter for EL wire. Powers off of a single AAA battery (not included!), it can drive up to 50cm / 20 inches of our high-brightness EL wire or 10cm x 1cm long piece of EL tape for 3 hours (o...

SKU: AF-1559 | Brand: Adafruit

So, you want lots and lots of NeoPixels? And you want them for less? Not a problem! Here's a sheet of Flora NeoPixels fresh from the (reflow) oven. Cut them off as you need 'em and save a pretty penny while you're ...

SKU: AF-1656 | Brand: Adafruit

3M Z-Axis Conductive Tape (9703) bonds two conductive surfaces together while allowing current to flow through the thickness of the tape — but not along its length or width. This anisotropic conductivity is achieved b...

SKU: AF-1850 | Brand: Adafruit

Add a touch of sparkle to your wearables with the Adafruit Gemma Sequin Starter Pack. This beginner-friendly kit includes a GEMMA V2 sewable microcontroller, warm white LED sequins, conductive thread, needles, and a c...