SparkFun MicroMod STM32WB5MMG Processor
53 units will be available shortly.
The MicroMod STM32WB5MMG Processor expands on SparkFun's MicroMod ST product line with a powerful combination of computing and wireless capabilities on one M.2-connectable processor. The STM32WB5MMG from STMicroelectronics™ is an ultra-low power microcontroller that combines a pair of Arm® Cortex® processors; a Cortex-M4 processor with FPU and ART for primary computing and a Cortex-M0 to run the 2.4 GHz RF stack. The module's radio is Bluetooth® Low Energy 5.3, Zigbee® 3.0, and OpenThread certified.
The Cortex-M4 CPU on this Processor can operate at a frequency of up to 64 MHz and features a floating point unit (FPU) single precision, which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The module uses an integrated chip antenna for the RF stack with Tx output power up to +6 dBm and Rx sensitivity of -96 dBm for BLE and -100 dBm for 802.15.4 protocols. The processor includes an additional 128Mb (16MB) serial flash memory chip.
MicroMod is a modular interface ecosystem that connects a microcontroller “processor board” to various “carrier board” peripherals. Utilizing the M.2 standard, the MicroMod standard is designed to easily swap out processors on the fly. Pair a specialized carrier board for the project you need with your choice of compatible processor!
Features:
STM32WB5MMG General Features:
- Pair of Arm® Cortex® Processors:
- Arm® Cortex®-M4 CPU with FPU (Floating Point Unit)
- Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory
- Frequency up to 64 MHz
- Memory protection unit
- 80 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1)
- DSP instructions
- Arm® Cortex®-M0+ CPU
- Dedicated to 2.4 GHz RF transceiver and security peripherals
- Arm® Cortex®-M4 CPU with FPU (Floating Point Unit)
- 2.4 GHz RF Transceiver
- Bluetooth® 5.3
- IEEE 802.15.4-2011 PHY and MAC
- Output Power: Programmable up to +6 dBm (1 dBm increments)
- RX Sensitivity:
- -96 dBm for BLE @ 1 Mbps
- -100 dBm for 802.15.4
- Max Range: 75 m
- 16 MB External Flash memory
- 256 KB SRAM
- Supply Voltage Range: 1.71 to 3.6 V
- Ultra-Low Power Consumption
- Shutdown Mode: 13 nA
- Stop Mode: 600 nA
- Standby Mode: 600 nA
- Radio: 4.5 mA (Rx) / 5.2 mA (Tx @ 0 dBm)
Specific Peripherals available on MicroMod STM32WB5MMG
- Two UART (One low power)
- Two I2C Buses
- SPI
- I2S Audio
- 16-bit Advanced Four-Channel Timer
- Two Dedicated Analog Inputs
- Two Dedicated PWM
- Shared with Timer pins
- Eight General Purpose I/O Pins
Documents:
MicroMod STM32WB5MMG Processor Documentation
- Schematic
- Eagle Files
- Board Dimensions
- Datasheet (STM32WB55MMG)
- Datasheet (STM32WB55xx)
- Reference Manual (STM32WB55xx)
- Hookup Guide
- GitHub Hardware Repo
MicroMod Documentation
Videos
The SparkFun MicroMod STM32WB5MMG Processor appears in the following collections:
SKU SF-DEV-21438
by Little Bird