Sensors
Browse our extensive range of sensor modules and breakout boards, covering temperature, distance, motion, touch, liquid level, radar, infrared, and more. Whether you're building with Arduino, Raspberry Pi, or your own custom PCB, you'll find the right sensor for your project.
Popular with Australian makers, students, and engineers for robotics, home automation, environmental monitoring, and STEM education. Fast shipping Australia-wide from our local warehouse.
Gravity Calibrated NH3 Ammonia Sensor - I2C/UART
SKU: DF-SEN0469 | Brand: DFRobot
This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...
Delivered by Fri 14 Aug
DFRobot SEN0704 6x6 Flexible Tactile Pressure Sensor - UART
SKU: DF-SEN0704 | Brand: DFRobot
This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-ti...
Delivered by Fri 14 Aug
DFRobot Ultra-Compact ToF Laser Ranging Sensor - 7.8m
SKU: DF-SEN0646 | Brand: DFRobot
This ultra-compact dToF laser ranging sensor uses 940nm laser pulses to measure distance up to 7.8 metres with typical ±4cm accuracy. It is designed for precise, real-time ranging in compact robotics, drone, IoT and a...
Delivered by Fri 14 Aug
SparkPNT GNSS Flex Module - LG290P & IM19 IMU
SKU: SF-GPS-29469 | Brand: SparkFun
This SparkPNT Flex board combines Quectel's LG290P quad-band RTK GNSS receiver with the Feyman (FMI) IM19 IMU, providing centimetre-level positioning with tilt compensation and anti-jamming performance for demanding n...
Delivered by Fri 14 Aug
SparkPNT GNSS Flex Module - ZED-X20P & IM19 IMU
SKU: SF-GPS-28997 | Brand: SparkFun
This GNSS Flex board combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU, giving compatible carrier boards centimetre-level positioning plus compensated attitude data for demanding navigation ...
Delivered by Fri 14 Aug
ESP8266 ESP-01/ESP-01S DHT11 Temperature Humidity WiFi NodeMCU Module for Arduino
SKU: EC-ESP82003S | Brand: Elecrow
A compact sensor shield that pairs with an ESP8266 ESP-01 or ESP-01S module to monitor temperature and humidity over WiFi. The onboard DHT11 sensor captures environmental data, which the ESP8266 processes and uploads ...
Out of stock
SparkFun Spectral Sensor Breakout - AS7263 NIR (Qwiic)
SKU: SF-SEN-14351 | Brand: SparkFun
The SparkFun AS7263 breakout brings near-infrared (NIR) spectroscopy to your microcontroller projects. The sensor measures six discrete NIR wavelengths, allowing you to characterise how different materials absorb and ...
Out of stock
SparkFun Spectral Sensor Breakout - AS7262 Visible (Qwiic)
SKU: SF-SEN-14347 | Brand: SparkFun
The SparkFun AS7262 Visible Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easy to measure and characterise how different materials absorb and reflect different wavelengths of light. ...
Out of stock
25m Long Distance ToF Laser Sensor (±3cm Accuracy, 100Hz, 100K LUX Resistant)
SKU: DF-SEN0647 | Brand: DFRobot
The TOFSense F2 is a high-performance laser distance sensor using dTOF (Direct Time-of-Flight) technology. With 25m range, ±3cm accuracy, and 100Hz refresh rate, it's ideal for robotics, industrial automation, drones,...
Out of stock
Gravity: High-Speed CAT4 SIM7600G-H Global 4G Communication and GNSS Positioning Module (150Mbps/50Mbps)
SKU: DF-TEL0162 | Brand: DFRobot
##Introduction The SIM7600G-H is an integrated wireless communication module featuring 4G CAT4 (with anuplink speed of 50Mbps and a downlink speed of 150Mbps) and GNSS positioning (supportingGPS, BD, GLONASS). It exte...
Out of stock
SparkFun GNSS Timing Breakout - ZED-F9T (Qwiic)
SKU: SF-GPS-18774 | Brand: SparkFun
The SparkFun GNSS Timing Breakout offers a unique entry into SparkFun's geospatial catalog featuring the ZED-F9T GNSS receiver from u-blox. The ZED-F9T provides up to five nanosecond timing accuracy under clear skies ...
Out of stock
Pycom Pytrack - GPS+motion shield for WiPy, SiPy, and LoPy
SKU: PI-PYC007 | Brand: Pimoroni
The Pycom Pytrack is a GPS and motion sensor shield compatible with Pycom multi-network modules including the WiPy, SiPy, and LoPy. It provides accurate GNSS positioning, a 3-axis accelerometer, USB serial access, LiP...
Out of stock
SparkFun Triad Spectroscopy Sensor - AS7265x (Qwiic)
SKU: SF-SEN-15050 | Brand: SparkFun
The SparkFun Triad Spectroscopy Sensor combines three AS7265x spectral sensors with onboard UV, visible, and IR LEDs to measure light across 18 individual frequencies — from 410 nm (UV) to 940 nm (IR). It brings light...
Out of stock
SparkFun OpenScale
SKU: SF-SEN-13261 | Brand: SparkFun
The SparkFun OpenScale is an open-source weight measurement board designed for load cells. Simply connect a four-wire or five-wire load cell of any capacity, plug into USB, open a serial terminal at 9,600 bps, and you...
Out of stock
SparkFun IR Thermometer Evaluation Board - MLX90614
SKU: SF-SEN-10740 | Brand: SparkFun
An evaluation board for the MLX90614 non-contact infrared thermometer sensor. It pairs the MLX90614 with an ATmega328 running at 3.3 V (8 MHz Arduino bootloader), giving you a ready-to-use IR temperature sensor with s...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
