Sensors & Modules

SKU: DF-SEN0270 | Brand: DFRobot

The MB1413 HRUSB-MaxSonar-EZ1 has millimeter resolution and a ~4Hz read rate, features a great blend of sensitivity as well as side object rejection, and provides short to long distance detection and range information...

SKU: DF-SEN0279 | Brand: DFRobot

The MB1414 USB-ProxSonar-EZ1 is an ultrasonic proximity and range sensor with a USB interface. It provides both proximity detection (target enter/exit a calibrated zone) and distance measurement with 1-inch resolution...

SKU: EF-EF04012 | Brand: ElecFreaks

Photo Interrupter Sensor is a sensor module based on ITR9608 photoelectric switch, together with special Arduino shield in use. It has been widely used in parts counting, motor speed and so on. Three pins electronic b...

SKU: EF-EF11083 | Brand: ElecFreaks

The Octopus Dust Sensor Module features the Sharp GP2Y1010AU0F optical dust sensor, capable of detecting fine particles with a diameter as small as 0.8 μm. It uses an infrared LED and phototransistor to measure dust d...

SKU: SF-GPS-15210 | Brand: SparkFun

The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positi...

SKU: SF-GPS-15193 | Brand: SparkFun

The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constella...

SKU: EF-EF04061 | Brand: ElecFreaks

A linear sliding potentiometer module from the ElecFreaks Octopus series. Provides an analogue voltage output proportional to the slider position, making it useful as a variable input for controlling volume, brightnes...

SKU: SF-SEN-14722 | Brand: SparkFun

This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (V...

SKU: SF-SEN-14678 | Brand: SparkFun

The Pixy2 CMUcam5 is smaller, faster and more capable than the original Pixy. Like its predecessor, the Pixy2 can learn to detect objects that you teach it, just by pressing a button. Additionally, the Pixy2 has ne...

SKU: SF-SEN-14599 | Brand: SparkFun

The LIDAR-Lite v3HP is a compact, high-performance optical distance measurement sensor from Garmin. Housed in a durable IPX7-rated enclosure, it delivers accurate range measurements from 5 cm to 40 m, making it an ide...

SKU: SF-SEN-14571 | Brand: SparkFun

It’s time to start utilizing the superior magnetometer, and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor bo...

SKU: DF-DFR0583 | Brand: DFRobot

  FEATURES     APPLICATIONS     Obstacle Avoidance Autonomous Mapping Route Planning Navigation    SPECIFICATION     Model: RPLDIAR-A3 Distance Range: 0.15 - 25 m Angula...

SKU: AF-4404 | Brand: Adafruit

These reflectance sensors feature a linear array of IR emitter/phototransistor pair modules in a high-density (4 mm pitch) arrangement, which makes them well suited for applications that require precise detection...

SKU: SF-DEV-14629 | Brand: SparkFun

The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...

SKU: SF-COM-15036 | Brand: SparkFun

The Bourns Absolute Encoder is a digital control knob that provides 128 unique results evenly spaced around a full circle. It is designed as a control panel knob but can be adapted for other uses. This can be a good a...

SKU: AF-3895 | Brand: Adafruit

Thermocouples are best used for measuring temperatures that can go above 100°C. This is a bare-wire bead-probe which can measure air or surface temperatures. Most inexpensive thermocouples have a vinyl covering whi...

SKU: AF-3846 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: SF-SEN-14843 | Brand: SparkFun

It’s time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating, in essence, a low resolution thermal imaging camera. With thi...

SKU: AF-3979 | Brand: Adafruit

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabi...

SKU: DF-DFR0033 | Brand: DFRobot

what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right.This magnetic sensor knows whether there is a magnetic object nearby or not. And it c...