Sensors & Modules

SKU: DF-DFR0076 | Brand: DFRobot

This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefig...

SKU: AF-4698 | Brand: Adafruit

The Adafruit AS7341 is a 10-channel multi-spectral light sensor that detects not just the amount of light present, but the specific wavelengths — giving you far more detailed colour information than a simple RGB senso...

SKU: AF-3386 | Brand: Adafruit

The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux...

SKU: WS-26517 | Brand: Waveshare

The Industrial Modbus RTU 8-Channel Relay Module (D) is a reliable RS485-controlled relay module with 8 digital inputs. Designed for industrial applications, it supports the Modbus RTU protocol and includes multiple i...

SKU: AF-5990 | Brand: Adafruit

The Adafruit Infrared IR Remote Transceiver combines a high-powered IR transmitter and a sensitive 38 kHz IR receiver on a single board. With two 940 nm IR LEDs (one vertical, one horizontal) driven by an onboard N-ch...

SKU: DF-TEL0163 | Brand: DFRobot

The A7670G is a global 4G CAT1 communication module that brings cellular connectivity to your IoT projects. With support for LTE-FDD, LTE-TDD, and GSM bands worldwide, it provides reliable data transmission at up to 1...

SKU: DF-SEN0572 | Brand: DFRobot

The Fermion MEMS H2 Sensor is a compact hydrogen gas detection module using micro-electromechanical system (MEMS) technology. It provides qualitative measurement of hydrogen concentration from 0.1 to 1000 ppm via an a...

SKU: DF-SEN0564 | Brand: DFRobot

The Fermion MEMS Carbon Monoxide Sensor uses micro-electromechanical system (MEMS) technology to detect CO gas concentrations from 5 to 5,000 ppm. Its compact size, low power consumption, short preheat time, and fast ...

SKU: DF-SEN0546 | Brand: DFRobot

This I2C digital temperature & humidity sensor offers high accuracy of ±3.0RH% for humidity and ±0.5°C for temperature and features a user-programmable humidity & temperature alarm function.Its housing is made of 304 ...

SKU: AF-5464 | Brand: Adafruit

This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play ...

SKU: AF-5425 | Brand: Adafruit

The Adafruit VL53L4CX is the longest-range Time-of-Flight (ToF) distance sensor in ST's VL5 series, measuring from approximately 1 mm up to 6000 mm (6 metres). It uses an invisible laser to precisely time how long lig...

SKU: LB-LS2708 | Brand: Little Bird

The AGS02MA is a MEMS-based TVOC (Total Volatile Organic Compounds) gas sensor with a calibrated digital signal output. It detects a range of polluting gases including ethanol, ammonia, sulfides, benzene vapours, and ...

SKU: MM-SKU0072 | Brand: Monk Makes

This board, designed for use with the Lets Talk Science Living Space Project, provides a CO2, temperature and Relative Humidity measurements to a BBC micro:bit.               &n...

SKU: DF-SEN0335 | Brand: DFRobot

Build up a simple environmental monitor station with this multi-function environment sensor! Based on the combination of CCS811+BME280 chip, this module features high accuracy, I2C interface, and fast Measurement. ...

SKU: LB-24-REED | Brand: Little Bird

A reed switch is an electrical switch which is operated when a magnetic field is brought near to it.  Check out our tutorial here Digital Output (DO)GND: In electronics, we define a point in a circuit to be a ki...

SKU: AF-4226 | Brand: Adafruit

The Adafruit INA260 is a precision DC power sensor that measures current, voltage, and power on either the high or low side of your circuit. With an integrated 2 mΩ (0.002Ω) 0.1% shunt resistor and 16-bit ADC, it hand...

SKU: PR-PIM058 | Brand: Little Bird

The Skywriter HAT uses electrical near-field 3D sensing to detect hand gestures and track position in three dimensions above the board. Powered by the Microchip MGC3130 sensor on a 4-layer PCB, it provides full X, Y, ...

SKU: LB-00111 | Brand: Little Bird

 Description:The rotary encoder is used to measure the speed and with PWM technology can achieve rapid speed devicesWith fixed bolt hole for easy installationGreat for DIY projectSpecification:Model: KY-040Workin...

SKU: LB-LR0022 | Brand: Little Bird

It's a push button!A push button with resistors and breadboard friendly layout.**Push Button Pinout:**- Signal (High when button pushed)- Positive- Ground**Specifications:**- 600mW MAX (50mA at 12v)

SKU: SF-COM-08636 | Brand: SparkFun

The MCP3002 is a 10-bit analog-to-digital converter (ADC) with a simple SPI interface, available in a breadboard-friendly 8-pin DIP package. Use it to add analog input capability to microcontrollers that lack an ADC, ...