Sensors & Modules

SKU: DF-DFR0743-SOLO | Brand: DFRobot

ESP32-S2- SOLO is a generic WiFi MCU module featuring rich peripherals and high performance. The module has 38 pins and 4 MB SPI flash. With the smallest size of 18×25.5×3.1mm among the S2 modules, it is ver...

SKU: DF-DFR0743-WROVER | Brand: DFRobot

The ESP32-S2-WROVER is a Wi-Fi MCU module built around the ESP32-S2 chip with 4 MB SPI flash and 2 MB PSRAM. The additional PSRAM makes it well suited for applications requiring larger data buffers, such as audio and ...

SKU: DF-DFR0743-WROOM | Brand: DFRobot

ESP32-S2- WROOM is a generic WiFi MCU module featuring rich peripherals and high performance. The module has 42 pins and 4MB flash, which can perform stable performance in industrial scenes.At the core of th...

SKU: SF-WRL-17746 | Brand: SparkFun

ESP32-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming...

SKU: SF-GPS-17285 | Brand: SparkFun

The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive sign...

SKU: EC-DTE01011I | Brand: Elecrow

ESP32-WROVER module is based on ESP32 chip, the core chip is ESP32-D0WDQ6. It is a setup of ESP-WROOM-32 with an additional 4MB SPI PSRAM (Pseudo static RAM). In addition, ESP32-WROVER module also has 4 MB external SP...

SKU: EF-EF04087 | Brand: ElecFreaks

Octopus BME280 Pressure Sensor is an electric brick, which has integrated temperature sensor, air pressure sensor and humidity sensor onboard. We can use it to measure humidity, temperature and air pressure, or eve...

SKU: AF-4686 | Brand: Adafruit

The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...

SKU: AF-4653 | Brand: Adafruit

The ESP32-S2-WROVER is a Wi-Fi module from Espressif built around the ESP32-S2 SoC — a single-core 240 MHz Xtensa LX7 processor with native USB support, 4 MB flash, and 2 MB PSRAM. It provides 2.4 GHz 802.11b/g/n Wi-F...

SKU: SF-SEN-16294 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: SF-SEN-16467 | Brand: SparkFun

Looking to keep a log of the climate in your greenhouse, create a humidor control system or want to track temperature and humidity data for a weather station project? The SparkFun SHTC3 Humidity Sensor may be the perf...

SKU: SF-GPS-15712 | Brand: SparkFun

The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the ...

SKU: SF-GPS-16329 | Brand: SparkFun

The SparkFun NEO-M8U GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered Dead Reckoning (UDR) technology. The module provides con...

SKU: SF-GPS-15733 | Brand: SparkFun

The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it ca...

SKU: EF-EF04096 | Brand: ElecFreaks

Octopus 3V laser sensor is the laser emission electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the s...

SKU: DF-DFR0624 | Brand: DFRobot

ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features a PCB antenna, a 4MB SPI flash and 64-Mbit SPI PSRAM that operates at 3.3V. The modul...

SKU: SF-SEN-15805 | Brand: SparkFun

The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of ±0.1°C across the temperature range of -20°C to +50°Cs w...

SKU: SF-SPX-15804 | Brand: SparkFun

Have you ever needed to monitor your yogurt in the community fridge because there’s a yogurt thief loose at work? Or have you ever needed the lights to flick on when walking in a room because your hands were full of g...

SKU: M5-U070 | Brand: Little Bird

The M5StickC Yun HAT is a cloud-shaped multi-sensor environmental monitoring accessory designed to mount on the M5StickC via the top socket. It integrates a temperature and humidity sensor (SHT20), barometric pressure...

SKU: DF-SEN0306 | Brand: DFRobot

A K-band 24GHz millimetre-wave ranging radar sensor with isolated transmitter and receiver antennas. Using FMCW modulation, it measures distance to object surfaces by transmitting and receiving microwaves, with all si...