Sensors & Modules

SKU: SF-SEN-21219 | Brand: SparkFun

The 22.86 x 22.86mm Nicla Voice allows for easy implementation of always-on speech recognition on the edge, because it integrates Syntiant’s powerful NDP120 Neural Decision processor to run multiple AI algorithms, ...

SKU: SF-BOB-16912 | Brand: SparkFun

The FLIR Lepton® Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the FLIR Lepton camera module to common platforms like Raspberry Pi or custom hardware. It provides onboard po...

SKU: SF-GPS-18378 | Brand: SparkFun

The SparkFun MicroMod GNSS Function Board features a u-blox NEO-M9N 92-channel GNSS receiver, supporting concurrent reception of GPS, GLONASS, Galileo, and BeiDou constellations with approximately 1.5 m horizontal acc...

SKU: SF-GPS-19663 | Brand: SparkFun

With GNSS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GNSS Real Time Kinematics (RTK) has mastered d...

SKU: SF-SEN-19764 | Brand: SparkFun

A Qwiic-compatible breakout board for the STMicroelectronics ISM330DHCX — a high-performance 3D accelerometer and 3D gyroscope designed for industrial applications. The 1" × 1" board communicates over I2C via the Qwii...

SKU: DF-SEN0408 | Brand: DFRobot

The Fermion H3LIS200DL is an ultra-low-power, low-noise triple-axis accelerometer with user-selectable full-scale ranges of ±100g and ±200g. Capable of measuring accelerations with output data rates from 0.5 Hz to 1 k...

SKU: DF-DFR0821 | Brand: DFRobot

A high-precision real-time clock (RTC) breakout board based on the DS3232 chip, featuring an integrated crystal resonator and temperature compensator. The DS3232 maintains accuracy of ±3.5ppm (±0.3 seconds/day) across...

SKU: DF-SEN0443 | Brand: DFRobot

The ICG-20660L is a high-precision 6-axis IMU module that integrates a 3-axis accelerometer(±2/4/8/16g), a 3-axis gyroscope(±125/250/500dps), and on-chip 16-bit ADCs. With up to ±1% initial sensitivity and low noise(6...

SKU: DF-SEN0423 | Brand: DFRobot

A high-precision digital barometric pressure sensor breakout based on the Bosch BMP390L. Designed for industrial-grade applications, it delivers exceptional temperature stability, low drift, and ultra-low power consum...

SKU: AF-4760 | Brand: Adafruit

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth...

SKU: AF-4464 | Brand: Adafruit

The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometer...

SKU: AF-4535 | Brand: Adafruit

The Adafruit HTS221 is an affordable I²C/SPI temperature and humidity sensor breakout board from ST. It measures relative humidity from 0–100% RH with 3.5% accuracy (in the 20–80% range) and temperature from -40 to 12...

SKU: SF-WRL-18583 | Brand: SparkFun

It's best to think of the ESP32-S2 WROOM Module as the next step in the ESP32 WROOM module line. It builds on the benefits of the original ESP32 WROOM Module with new and improved features such as security, display su...

SKU: DF-DFR0810 | Brand: DFRobot

ESP32-C3-WROOM-02 is a universal Wi-Fi and low-power Bluetooth LE module. The rich set of peripherals and small size make the two modules an ideal choice for smart homes, industrial automation, health care, consumer e...

SKU: DF-DFR0814 | Brand: DFRobot

ESP32-S2-MINI-1 is a powerful, generic WiFi-MCU module that has a rich set of peripherals. It can be applied in a wide variety of scenarios relating to wearable electronics, smart home, etc. The module embeds ESP32...

SKU: DF-DFR0743-SOLO | Brand: DFRobot

ESP32-S2- SOLO is a generic WiFi MCU module featuring rich peripherals and high performance. The module has 38 pins and 4 MB SPI flash. With the smallest size of 18×25.5×3.1mm among the S2 modules, it is ver...

SKU: DF-DFR0743-WROVER | Brand: DFRobot

The ESP32-S2-WROVER is a Wi-Fi MCU module built around the ESP32-S2 chip with 4 MB SPI flash and 2 MB PSRAM. The additional PSRAM makes it well suited for applications requiring larger data buffers, such as audio and ...

SKU: DF-DFR0743-WROOM | Brand: DFRobot

ESP32-S2- WROOM is a generic WiFi MCU module featuring rich peripherals and high performance. The module has 42 pins and 4MB flash, which can perform stable performance in industrial scenes.At the core of th...

SKU: SF-WRL-17746 | Brand: SparkFun

ESP32-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming...

SKU: SF-SEN-17241 | Brand: SparkFun

The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g. This breakout measures the static acceleration of gravity in tilt-sensing applications, as ...