Sensors & Modules

SKU: DF-DFR0896 | Brand: DFRobot

The ESP32-S3-WROOM-1-N4 is a powerful Wi-Fi and Bluetooth LE MCU module built around the ESP32-S3 SoC. Featuring a dual-core Xtensa LX7 processor running at up to 240MHz, 4MB SPI flash, and hardware acceleration for n...

SKU: DF-SEN0502 | Brand: DFRobot

This looks like a potentiometer, but it’s an encoder switch. It is a cascadable 360 ° rotary encoder switch with 20 pulses per revolution, and each pulse corresponds to a detent. There are LED lights set for each dete...

SKU: AF-4716 | Brand: Adafruit

The Adafruit MS8607 is a factory-calibrated 3-in-1 sensor that measures barometric pressure, relative humidity, and temperature over I2C. Made by TE Connectivity, this PHT (Pressure, Humidity, Temperature) sensor is a...

SKU: AF-3966 | Brand: Adafruit

The BMP388 from Bosch is a high-precision barometric pressure and temperature sensor, offering significantly improved altitude accuracy over the BMP280. With altitude noise as low as 0.1 metres and a relative accuracy...

SKU: AF-1893 | Brand: Adafruit

The MPL3115A2 is a precision barometric pressure, altitude, and temperature sensor from NXP (formerly Freescale) that communicates over I2C. With 1.5 Pa resolution, it can resolve altitude changes as small as 0.3 m an...

SKU: DF-DFR0972 | Brand: DFRobot

The Gravity I2C 4-20mA DAC Module outputs 0–25 mA of current controlled via I2C, with high-accuracy 4–20 mA output available after calibration (0.2% linearity error). Built around the GP8302 chip, it provides 12-bit r...

SKU: DF-SEN0518 | Brand: DFRobot

The DFRobot Gravity MAX30102 sensor module measures heart rate and blood oxygen saturation (SpO2) using photoplethysmography (PPG). It integrates the Maxim MAX30102 chip with an on-board MCU that processes raw PPG dat...

SKU: DF-SEN0385 | Brand: DFRobot

This is an SHT31 Temperature & Humidity sensor housed in a weather-proof enclosure. The sensor is designed to be waterproof so you can use it safely in outdoor projects. Please note that although the sensor is waterpr...

SKU: PR-PIM058 | Brand: Little Bird

The Skywriter HAT uses electrical near-field 3D sensing to detect hand gestures and track position in three dimensions above the board. Powered by the Microchip MGC3130 sensor on a 4-layer PCB, it provides full X, Y, ...

SKU: AF-3965 | Brand: Adafruit

The Adafruit MPRLS Ported Pressure Sensor Breakout measures absolute air pressure from 0 to 25 PSI (0–172 kPa) via a stainless steel port. Unlike typical barometric sensors, the metal port lets you attach tubing to me...

SKU: EF-EF05046 | Brand: ElecFreaks

The ELECFREAKS PlanetX Speech Recognition Sensor adds voice control to your micro:bit projects. Built around the SNR9815 IC, this module recognises spoken English commands and supports self-learning custom words, lett...

SKU: WS-24658 | Brand: Waveshare

BMP390 High Precision Barometric Pressure Sensor, Barometric Pressure / Altitude / Temperature Measuring BMP390 High Precision Barometric Pressure Sensor Suitable for Barome...

SKU: SF-SEN-22857 | Brand: SparkFun

Virtual reality is in, but you shouldn't have to drop hundreds of dollars to gain access to the technology behind it. Luckily, that's where the SparkFun VR IMU Breakout comes in. At its heart is CEVA’s BNO086, a combi...

SKU: SF-SEN-22397 | Brand: SparkFun

The SparkFun BMI270 6DoF IMU Breakout is a Qwiic-enabled board featuring the ultra-low-power BMI270 inertial measurement unit from Bosch. It combines a 16-bit tri-axial accelerometer and 16-bit tri-axial gyroscope wit...

SKU: DF-DFR0819 | Brand: DFRobot

This real-time clock module (RTC) uses the DS3231 chip that integrates a crystal resonator and a temperature compensator, which improves the long-term accuracy of the module. In the range of -40°C to +85°C, the accura...

SKU: AF-4494 | Brand: Adafruit

The Adafruit DPS310 is a high-precision barometric pressure and altitude sensor from Infineon, mounted on a breakout board with STEMMA QT / Qwiic connectors for solderless I2C wiring. It delivers ±1 hPa absolute accur...

SKU: DF-DFR0231-H | Brand: DFRobot

Gravity: UART & I2C NFC Module adopts NXP PN532, a highly integrated NFC communication controller, which supports various types of NFC smart cards or tags like the commonly used MIFARE Classic series and NTAG series i...

SKU: DF-SEN0629 | Brand: DFRobot

  The BME688 AI Environmental Sensor is a highly advanced MEMS sensor that combines temperature, humidity, barometric pressure, and VOC detection in a single, compact package. Featuring ±0.5°C temperature accurac...

SKU: SF-SEN-22396 | Brand: SparkFun

This SparkFun CO2 Humidity and Temperature Sensor features the next-generation SCD41 photoacoustic CO2 sensor for high-accuracy environmental readings. The SCD41 uses Sensirion's PASens® photoacoustic measurement syst...

SKU: DF-DFR0998 | Brand: DFRobot

This real-time clock (RTC) module uses the SD3031 chip, which has an integrated crystal oscillator and temperature compensator. This provides high-precision timing and stability. At a temperature of 25 °C, the accurac...