Sensors & Modules
Explore a broad range of sensors and modules for electronics projects, from temperature and distance sensors to IMUs, relay modules, ADC breakouts, and liquid level sensors. Whether you're building a weather station, robotics project, or home automation system, you'll find the right component here.
Popular with Australian hobbyists, STEM educators, and professional makers, these modules work with Arduino, Raspberry Pi, and other common platforms. Fast shipping across Australia to get your project moving.
Alcohol Gas Sensor - MQ-3
SKU: SF-SEN-08880 | Brand: SparkFun
The MQ-3 is an alcohol gas sensor suitable for detecting alcohol concentration in the air, similar to a breathalyser. It provides an analog resistive output based on alcohol concentration, with high sensitivity and fa...
Delivered by Thu 15 Oct
Gravity: Analog 50A Current Sensor (AC/DC)
SKU: DF-SEN0098 | Brand: DFRobot
INTRODUCTION This is a breakout board for the fully integrated Hall Effect based linear ACS758 current sensor. The sensor gives precise current measurement for both AC and DC signals.The thickness of the ...
Delivered by Thu 15 Oct
SparkFun Soil Moisture Sensor
SKU: SF-SEN-13322 | Brand: SparkFun
The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture sensor is pretty straight forward to use. The two large exposed pads function as probe...
Delivered by Thu 15 Oct
Non-Invasive Current Sensor - 30A
SKU: SF-SEN-11005 | Brand: SparkFun
This non-invasive current sensor (also known as a split-core current transformer) clamps around the supply line of an electrical load to measure how much current is flowing through it. The sensor acts as an inductor, ...
Delivered by Thu 15 Oct
Panel Current Meter - 0 to 9.99A
SKU: AF-574 | Brand: Adafruit
Put a current meter anywhere with this very handy display. This panel meter requires a DC voltage to run, and then has two thick gauge wires to measure current draw. A shunt is already on board so its very easy to hoo...
Delivered by Fri 6 Nov
LPG Gas Sensor - MQ-6
SKU: SF-SEN-09405 | Brand: SparkFun
A simple-to-use MQ-6 gas sensor for detecting liquefied petroleum gas (LPG) — primarily propane and butane — in the air. The sensor detects concentrations from 200 to 10,000 ppm with high sensitivity and fast response...
Delivered by Thu 15 Oct
Methane CNG Gas Sensor - MQ-4
SKU: SF-SEN-09404 | Brand: SparkFun
This is a simple-to-use compressed natural gas (CNG) sensor, suitable for sensing natural gas (composed of mostly Methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations anywhere from ...
Delivered by Thu 15 Oct
Gravity: Conductivity Sensor Switch
SKU: DF-SEN0223 | Brand: DFRobot
The Gravity Conductivity Sensor Switch module can be used to detect if an object has electrical conductivity. Its maximum detection value is 10MΩ. It can detect not only coins, wires, metal and other good conducto...
Delivered by Mon 26 Oct
Gravity: Analog Current Sensor 50A (AC/DC) V2
SKU: DF-SEN0098-V2 | Brand: DFRobot
##Introduction This is an updated version. Retired Product: Gravity: Analog 50A Current Sensor (AC/DC) V1Get this low-power current sensor to monitor your project every second for saving energy or protecting the circu...
Delivered by Mon 26 Oct
ELECFREAKS PlanetX MQ5 Sensor
SKU: EF-EF05033 | Brand: ElecFreaks
The ELECFREAKS PlanetX MQ5 Sensor is an essential sensor for environmental detection. The ELECFREAKS PlanetX MQ5 Sensor can be used to detect the leakage of flammable gas, you can use it to make a household gas leak a...
Delivered by Thu 29 Oct
Fermion: MEMS Formaldehyde HCHO Gas Detection Sensor (Breakout, 0-3ppm)
SKU: DF-SEN0563 | Brand: DFRobot
Fermion: MEMS Formaldehyde HCHO Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA),...
Delivered by Mon 26 Oct
Fermion: MEMS Nitrogen Dioxide NO2 Gas Detection Sensor (Breakout, 0.1-10ppm)
SKU: DF-SEN0574 | Brand: DFRobot
Fermion: MEMS Nitrogen Dioxide NO2 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20m...
Delivered by Mon 26 Oct
UART Non-contact Optical Turbidity Sensor for Arduino
SKU: DF-SEN0554 | Brand: DFRobot
This non-contact turbidity sensor detects water quality by measuring the level of turbidity. Based on the optics principle, it is capable of detecting the light transmittance and scattering rate of the liquid in trans...
Delivered by Mon 26 Oct
Gravity: HCL Sensor (Calibrated) - I2C & UART
SKU: DF-SEN0474 | Brand: DFRobot
This is a sensor that detects hydrogen chloride concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentr...
Delivered by Mon 26 Oct
Gravity: PH3 Sensor (Calibrated) - I2C & UART
SKU: DF-SEN0476 | Brand: DFRobot
This is a sensor that detects phosphine concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of...
Delivered by Mon 26 Oct
Fermion: MEMS Gas Sensor - MiCS-5524 (Breakout)
SKU: DF-SEN0440 | Brand: DFRobot
A compact MEMS gas sensor breakout based on the MiCS-5524, capable of detecting concentrations of multiple gases including carbon monoxide (CO), methane (CH4), ethanol (C2H5OH), propane (C3H8), butane (C4H10), hydroge...
Delivered by Mon 26 Oct
Fermion: MEMS Gas Sensor - MiCS-2714 (Breakout)
SKU: DF-SEN0441 | Brand: DFRobot
This is a hydrogen and nitrogen oxide gas concentration sensor launched by DFRobot. The sensor uses MEMS technology to support gas concentration detection of NO, NO2 and H2. The matching sample code integrates the co...
Delivered by Mon 26 Oct
Dual Gas CO and CH4 Detection Sensor - MQ-9B
SKU: SF-SEN-17050 | Brand: SparkFun
The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by method of cycling high and low tem...
Delivered by Mon 26 Oct
Smoke Sensor - MQ-2
SKU: SF-SEN-17049 | Brand: SparkFun
The MQ-2 is a smoke and combustible gas sensor manufactured by Winsen. It detects flammable gases and smoke in a concentration range of 300–10,000 ppm, with particularly high sensitivity to propane and smoke. It's wid...
Delivered by Mon 26 Oct
Ammonia Gas Sensor - MQ-137
SKU: SF-SEN-17053 | Brand: SparkFun
The MQ-137 is an ammonia (NH3) gas sensor from Winsen, designed to detect ammonia concentrations in the air. The sensing element is tin dioxide (SnO2), which has lower conductivity in clean air and increases in conduc...
Delivered by Mon 26 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared