Sensors & Input

SKU: DF-SEN0654 | Brand: DFRobot

This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas s...

SKU: DF-SEN0664 | Brand: DFRobot

Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help...

SKU: DF-SEN0665 | Brand: DFRobot

This compact Gravity module brings Bosch BMP581 pressure and temperature sensing to microcontroller projects that need stable altitude or environmental readings. It is designed for applications such as drone altitude ...

SKU: DF-SEN0475 | Brand: DFRobot

Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industria...

SKU: DF-KIT0222 | Brand: DFRobot

This kit bundles the HUSKYLENS 2 edge AI vision sensor with the HUSKYLENS 2 WiFi Module and HUSKYLENS 2 Wide-angle Camera Module, giving robotics and maker projects on-device visual recognition plus wireless interacti...

SKU: DF-SEN0469 | Brand: DFRobot

This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...

SKU: SF-GPS-23288 | Brand: SparkFun

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in ...

SKU: SF-GPS-26620 | Brand: SparkFun

Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout ...

SKU: SF-KIT-23452 | Brand: SparkFun

Get started with high-precision RTK GNSS and dead reckoning using u-blox's ZED-F9R module. This kit combines a sensor-fusion GPS breakout, a multiband SMA antenna and a USB cable so you have the core hardware needed f...

SKU: SF-GPS-22693 | Brand: SparkFun

This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, corr...

SKU: SF-GPS-28019 | Brand: SparkFun

This high-precision positioning breakout is built around the Quectel LG580P GNSS module, giving projects centimetre-level RTK positioning plus instantaneous heading when used with two GNSS antennas. Unlike systems tha...

SKU: SF-WRL-24738 | Brand: SparkFun

This UHF RFID reader brings long-range, multi-tag RFID reading and writing to embedded projects, desktop testing and inventory-style applications. Built around the JADAK M7E Hecto module, it works with standard EPCglo...

SKU: DF-SEN0705 | Brand: DFRobot

This flexible tactile pressure sensor gives your project a compact 4 x 8 pressure matrix for mapping contact across a small surface. It integrates 32 independent sensing points in a 20 x 10mm active area, making it us...

SKU: DF-SEN0676 | Brand: DFRobot

This 80GHz millimetre-wave radar module is built for precise, non-contact liquid level detection. Using Frequency Modulated Continuous Wave (FMCW) radar, it measures from above the liquid surface, making it suitable f...

SKU: DF-SEN0675 | Brand: DFRobot

The TFA300-L is a compact single-point LiDAR sensor designed for fast, precise distance measurement on dynamic platforms such as drones and optoelectronic systems. It uses Time-of-Flight (ToF) laser ranging to provide...

SKU: DF-SEN0646 | Brand: DFRobot

This ultra-compact dToF laser ranging sensor uses 940nm laser pulses to measure distance up to 7.8 metres with typical ±4cm accuracy. It is designed for precise, real-time ranging in compact robotics, drone, IoT and a...

SKU: DF-SEN0627 | Brand: DFRobot

This compact ultrasonic ranging module is made for accurate long-range distance measurement in outdoor, environmental and industrial monitoring projects. It measures targets from 25 cm to 800 cm, making it useful for ...

SKU: DF-DFR1024 | Brand: DFRobot

Built for robot mapping and navigation, the RPLIDAR S2E uses SLAMTEC DTOF (Direct Time-of-Flight) technology to provide consistent ranging resolution across its measuring distance. It can detect a wide range of materi...

SKU: DF-DFR1219 | Brand: DFRobot

This compact solid-state LiDAR module gives robots and automation gear short-range obstacle awareness without the moving parts of a mechanical scanner. It covers 70mm to 1000mm with an 85° field of view and 0.54° angu...

SKU: SF-SEN-26817 | Brand: SparkFun

The CygLiDAR D2 is a compact, solid-state time-of-flight LiDAR sensor that can generate both 2D range maps and 3D point cloud data. With no moving parts, it is designed for durability in vibration-prone or harsh indoo...