Sensors & Input

SKU: LB-LR0005 | Brand: Little Bird

The Line Trace Sensor Module uses an infrared emitter/detector pair to measure the reflectivity of a surface below it. When the reflectivity exceeds an adjustable threshold, the output goes low — making it ideal for b...

SKU: AF-189 | Brand: Adafruit

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensiti...

SKU: LB-LR0051 | Brand: Little Bird

A 4-channel relay module with opto-isolated inputs for safe, reliable switching of high-power loads. Each relay is rated for up to 10A at 250VAC or 30VDC, making it suitable for controlling lights, motors, heaters, an...

SKU: AF-157 | Brand: Adafruit

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to...

SKU: AF-2168 | Brand: Adafruit

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that s...

SKU: DF-SEN0197 | Brand: DFRobot

The Gravity Voice Recorder Module is a compact board with integrated record and playback functions, based on the ISD1820 chip. Simply press the record button, speak into the onboard microphone, and release to save up ...

SKU: AF-2349 | Brand: Adafruit

This Reflective IR Sensor is a simple plastic casing with two elements - an IR LED and an IR phototransistor. You can control the IR LED and turn it on to bounce IR off objects to determine their reflectivity. White &...

SKU: LB-LS6569 | Brand: Little Bird

A DIY soldering kit that builds into a functional ultrasonic distance meter. Using an HC-SR04 ultrasonic sensor, STC89C52 microcontroller, and 3-digit 7-segment display, this kit measures distances from 5cm to 4m with...

SKU: AF-5022 | Brand: Adafruit

The Adafruit Proximity Trinkey is a tiny USB-A development board built around the APDS9960 multi-function sensor and an ATSAMD21 microcontroller. Plug it into any USB port and you instantly have proximity, colour, amb...

SKU: SF-COM-27883 | Brand: SparkFun

The ENS22S001 is a high-quality mechanical rotary encoder from Cooka, offering 64 pulses per revolution with standard quadrature (A/B) output. Fully sealed and rated IP65, it's built for reliable operation in harsh en...

SKU: SF-COM-27884 | Brand: SparkFun

The CS19D128B is a high-quality magnetic rotary encoder from Cooka, offering smooth, low-friction rotation with 128 pulses per revolution and no detent positions. Pressing the shaft activates a built-in push switch. ...

SKU: SF-SEN-28798 | Brand: SparkFun

  This is the HC-SR04 ultrasonic distance sensor, now in Red! This economical sensor offers non-contact measurement functionality ranging from 2cm to 400cm, with a ranging accuracy of up to 3mm. Each HC-SR04 ...

SKU: DF-SEN0585 | Brand: DFRobot

##Introduction This is a compact single-point laser radar based on the Time-of-Flight (ToF) principle. With a lightweight design of only 9 grams, it is incredibly convenient to install. Thanks to its low power consump...

SKU: M5-A042 | Brand: Little Bird

Description NEOFLASH is a RGB LED panel with 192 RGB LED(24x8). When you program this Unit, please pay attention to the sequence of the Neopixels. From top left (Where PIR placed) to right, and top to bottom. Co...

SKU: AF-2167 | Brand: Adafruit

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to tha...

SKU: DF-SEN0647 | Brand: DFRobot

The TOFSense F2 is a high-performance laser distance sensor using dTOF (Direct Time-of-Flight) technology. With 25m range, ±3cm accuracy, and 100Hz refresh rate, it's ideal for robotics, industrial automation, drones,...