Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
Analog Mini Thumbstick Breakout Board
SKU: AF-3246 | Brand: Adafruit
A neat little breakout board designed for mounting a PSP-style mini thumbstick to your project. The board features panel-mount friendly hole placement and dual-sided headers for mechanical stability when connected to ...
Delivered by Wed 14 Oct
Gravity:Analog UV Sensor V2
SKU: DF-SEN0162 | Brand: DFRobot
The Gravity Analog UV Sensor V2 uses a GUVA-S12SD photodiode to detect ultraviolet radiation in the 200–370 nm (UV-A) wavelength range. It outputs a linear analogue voltage signal proportional to UV intensity, making ...
Delivered by Thu 1 Oct
Panel Temperature Meter / -30 to +70 °C
SKU: AF-576 | Brand: Adafruit
Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has revers...
Delivered by Wed 14 Oct
SparkFun Sound Detector
SKU: SF-SEN-12642 | Brand: SparkFun
The SparkFun Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of so...
Delivered by Thu 1 Oct
Analog UV Light Sensor Breakout - GUVA-S12SD
SKU: AF-1918 | Brand: Adafruit
An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable vo...
Delivered by Tue 22 Sep
Force Sensitive Resistor - Long
SKU: SF-SEN-09674 | Brand: SparkFun
This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area....
Delivered by Thu 1 Oct
Gravity: Heart Rate Monitor Sensor For Arduino
SKU: DF-SEN0203 | Brand: DFRobot
The DFRobot heart rate sensor is a thumb-sized heart rate monitor designed for Arduino microcontrollers. This sensor is a pulse sensor which is developed based on PPG (PhotoPlethysmoGraphy) techniques. This ...
Delivered by Thu 1 Oct
IR Reflectance Sensor - QRE1113
SKU: SF-COM-09542 | Brand: SparkFun
The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because, if it can sense if a surface is white or black. There are four pins on the QRE1113 - two control the IR em...
Delivered by Thu 1 Oct
Thumb Slide Joystick
SKU: SF-COM-09426 | Brand: SparkFun
A compact resistive analog joystick similar to those found on the PSP1000. Unlike traditional thumbstick joysticks, this one has a distinctive flat "slide" feel with a removable rubber thumb pad. Connect to an Arduin...
Delivered by Thu 1 Oct
Touch screen (Nintendo DSL digitizer)
SKU: AF-333 | Brand: Adafruit
A 4-wire resistive touch screen digitiser (originally designed for the Nintendo DS Lite) that works with a stylus or fingertip. It can be used with any microcontroller that has 2 digital pins and 2 analogue input pins...
Delivered by Wed 14 Oct
Gravity: Thin-film Pressure Sensor for Pressure Science Course
SKU: DF-SEN0616 | Brand: DFRobot
The Gravity: Thin-film Pressure Sensor measures pressure through the deformation of a flexible film material. As pressure increases, the film deforms, producing higher analog output values, while lighter pressure resu...
Delivered by Thu 1 Oct
Sensor ELECFREAKS PlanetX MQ2
SKU: EF-EF05031 | Brand: ElecFreaks
The gas sensor is an essential sensor for environmental detection. ELECFREAKS PlanetX MQ2 Sensor can be used for smoke detection, the greater the smoke is, the greater the voltage value will be. It is able to detect t...
Delivered by Tue 6 Oct
ELECFREAKS PlanetX CO2 Sensor
SKU: EF-EF05030 | Brand: ElecFreaks
The gas sensor is an essential sensor for environmental detection. The ELECFREAKS PlanetX CO2 Sensor is designed to detect the concentration of CO2 with high sensitivity. The higher the concentration of CO2 is, the sm...
Delivered by Tue 6 Oct
ESP32-C6 WROOM Module - 16MB (PCB Antenna)
SKU: SF-WRL-24806 | Brand: SparkFun
The ESP32-C6-WROOM-1 is Espressif's first Wi-Fi 6 module, integrating 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) on a single chip. Built around a high-performance 32-bit RISC-V c...
Delivered by Thu 1 Oct
ESP32-H2-MINI-1 Module - 4MB Flash
SKU: AF-5716 | Brand: Adafruit
Coming soon! ESP32-H2-MINI-1 is a powerful, generic Bluetooth® Low Energy and IEEE 802.15.4 combo module that has a rich set of peripherals. This module is an ideal choice for a wide variety of application scenari...
Delivered by Wed 14 Oct
SparkFun OpenLog Data Collector with Machinechat - Base Kit
SKU: SF-KIT-20673 | Brand: SparkFun
The Base version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an ope...
Delivered by Thu 1 Oct
SparkFun OpenLog Data Collector with Machinechat - Environmental Monitoring
SKU: SF-KIT-20683 | Brand: SparkFun
The Environmental Monitoring version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data from an included BME280 Qwiic Atmospheric Sensor with the OpenLog Artem...
Delivered by Thu 1 Oct
Monk Makes Plant Monitor - Capacitive Moisture Meter
SKU: AF-5587 | Brand: Adafruit
If you're like me and have trouble keeping your calatheas and pepperomias happy and not overwatering them to root rot ruin, why not take a gander at the Plant Monitor from Ada-friend Monk Makes. Its a super easy and f...
Delivered by Wed 14 Oct
Intelligent Rain Detection Module
SKU: DF-SEN0545 | Brand: DFRobot
This smart rain sensor offers a fast way to detect rainfall change on glass in real-time free from effects like sunlight, dust, leaves, etc., and feeds back information (no rain, light rain, moderate rain, or heavy ra...
Delivered by Thu 1 Oct
MyoWare 2.0 Link Shield
SKU: SF-DEV-18425 | Brand: SparkFun
The MyoWare 2.0 Link Shield connects a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller via a 3.5mm TRS cable. Simply snap the Link Shield onto your Muscle Sensor using the built-in snap connectors, connect a...
Delivered by Thu 1 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
