Sensors & Input

SKU: SF-SEN-08680 | Brand: SparkFun

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative posit...

SKU: SF-SEN-00250 | Brand: SparkFun

10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Vishay part #: NTCLE100E3103JB0 Note: You get only one thermistor. Document...

SKU: AF-245 | Brand: Adafruit

The 2-Axis Joystick provides analogue input for your projects using two independent 10K potentiometers — one per axis. It reports position as either voltage or resistance, making it compatible with a wide range of mic...

SKU: SF-SEN-09673 | Brand: SparkFun

A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...

SKU: DF-DFR1132 | Brand: DFRobot

##Introduction Gravity: Linear/Analog Hall Sensor is a high-precision device designed for measuring and monitoring magnetic field strength. Advanced Hall effect circuitry at the core converts magnetic induction streng...

SKU: EF-EF05032 | Brand: ElecFreaks

An alcohol vapour sensor module from the ELECFREAKS PlanetX range, designed for use with micro:bit via an RJ11 connector. The MQ3 sensor uses a tin dioxide (SnO2) sensing element whose conductivity increases with alco...

SKU: EF-EF05018 | Brand: ElecFreaks

An analogue trimpot (trimmer potentiometer) sensor module from the ELECFREAKS PlanetX series, designed for use with micro:bit via RJ11 connection. The potentiometer provides stepless rotation over a 0°–300° range, out...

SKU: SF-SEN-24048 | Brand: SparkFun

A line follower sensor gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measuring the amount of reflected infrared ligh...

SKU: SF-DEV-18426 | Brand: SparkFun

The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would...

SKU: DF-DFR0809 | Brand: DFRobot

The ESP32-C3-MINI-1-N4 is a compact Wi-Fi and Bluetooth Low Energy module from Espressif, built around the ESP32-C3FN4 chip with a 32-bit RISC-V single-core processor running at up to 160 MHz. It includes 4 MB of embe...

SKU: AF-4534 | Brand: Adafruit

The Bonsai Buckaroo is a compact add-on board for micro:bit and Adafruit CLUE that turns your board into a plant care monitoring and watering system. Bolt it on with 5 screws to get a buzzer, motor driver, and soil mo...

SKU: AF-3575 | Brand: Adafruit

The Adafruit Touch Screen Breakout Board provides a simple way to connect a 4-wire resistive touch panel with a 1.0mm pitch FPC connector to your project. The connector is soldered onto a compact breakout board, with ...

SKU: SF-COM-16273 | Brand: SparkFun

A 16 mm deluxe thumb joystick similar to the analogue sticks found in PlayStation controllers. Two 10K potentiometers provide analogue position data for the full range of motion on both axes, and a built-in select but...

SKU: EF-EF04079 | Brand: ElecFreaks

Octopus TMP36 Temperature Sensor Brick is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need an...

SKU: AF-4540 | Brand: Adafruit

A strain gauge is a type of electronic sensor used to measure force or strain (big surprise there). They are made of an insulating flexible backing with a metallic foil pattern. The resistance of a strain gauge change...

SKU: DF-SEN0294 | Brand: DFRobot

This is a circular flexible thin film pressure sensor of short legs with a diameter of 18.3mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable and designed to sense static an...

SKU: SF-COM-14622 | Brand: SparkFun

An adjustable potentiometer can open up many interesting user interfaces. With this rotary potentiometer just turn the dial and the resistance changes. This potentiometer has a ¼" metal knurled shaft diameter, solder ...

SKU: SF-SEN-14728 | Brand: SparkFun

This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 500g of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that cha...

SKU: AF-1093 | Brand: Adafruit

Pulse Sensor Amped is a greatly improved version of the original Pulse Sensor, a plug-and-play heart-rate sensor for Arduino and Arduino compatibles. It can be used by students, artists, athletes, makers, and game & m...

SKU: AF-1164 | Brand: Adafruit

This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy INA169 chip on this breakout to both measure both the DC current draw and have a...