Sensors & Input

SKU: DF-DFR0810 | Brand: DFRobot

ESP32-C3-WROOM-02 is a universal Wi-Fi and low-power Bluetooth LE module. The rich set of peripherals and small size make the two modules an ideal choice for smart homes, industrial automation, health care, consumer e...

SKU: DF-DFR0814 | Brand: DFRobot

ESP32-S2-MINI-1 is a powerful, generic WiFi-MCU module that has a rich set of peripherals. It can be applied in a wide variety of scenarios relating to wearable electronics, smart home, etc. The module embeds ESP32...

SKU: DF-DFR0743-SOLO | Brand: DFRobot

ESP32-S2- SOLO is a generic WiFi MCU module featuring rich peripherals and high performance. The module has 38 pins and 4 MB SPI flash. With the smallest size of 18×25.5×3.1mm among the S2 modules, it is ver...

SKU: DF-DFR0743-WROVER | Brand: DFRobot

The ESP32-S2-WROVER is a Wi-Fi MCU module built around the ESP32-S2 chip with 4 MB SPI flash and 2 MB PSRAM. The additional PSRAM makes it well suited for applications requiring larger data buffers, such as audio and ...

SKU: DF-DFR0743-WROOM | Brand: DFRobot

ESP32-S2- WROOM is a generic WiFi MCU module featuring rich peripherals and high performance. The module has 42 pins and 4MB flash, which can perform stable performance in industrial scenes.At the core of th...

SKU: SF-WRL-17746 | Brand: SparkFun

ESP32-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming...

SKU: SF-SEN-17241 | Brand: SparkFun

The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g. This breakout measures the static acceleration of gravity in tilt-sensing applications, as ...

SKU: EC-DTE01011I | Brand: Elecrow

ESP32-WROVER module is based on ESP32 chip, the core chip is ESP32-D0WDQ6. It is a setup of ESP-WROOM-32 with an additional 4MB SPI PSRAM (Pseudo static RAM). In addition, ESP32-WROVER module also has 4 MB external SP...

SKU: EF-EF04087 | Brand: ElecFreaks

Octopus BME280 Pressure Sensor is an electric brick, which has integrated temperature sensor, air pressure sensor and humidity sensor onboard. We can use it to measure humidity, temperature and air pressure, or eve...

SKU: AF-4653 | Brand: Adafruit

The ESP32-S2-WROVER is a Wi-Fi module from Espressif built around the ESP32-S2 SoC — a single-core 240 MHz Xtensa LX7 processor with native USB support, 4 MB flash, and 2 MB PSRAM. It provides 2.4 GHz 802.11b/g/n Wi-F...

SKU: SF-KIT-15948 | Brand: SparkFun

Do you see what we see? With the FLIR Radiometric Lepton® Dev Kit v2 you will be able to bring FLIR's thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an ea...

SKU: AF-4502 | Brand: Adafruit

The Adafruit ISM330DHCX is an industrial-quality 6-DoF IMU from ST, combining a 3-axis accelerometer and 3-axis gyroscope on a single silicon die for synchronised measurements. With an extended gyroscope range of ±400...

SKU: DF-DFR0624 | Brand: DFRobot

ESP32-WROVER-B is a highly-integrated generic WiFi-BT-BLE-MCU module with steady performance and low power consumption. It features a PCB antenna, a 4MB SPI flash and 64-Mbit SPI PSRAM that operates at 3.3V. The modul...

SKU: AF-3979 | Brand: Adafruit

The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabi...

SKU: SF-GPS-15136 | Brand: SparkFun

With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...

SKU: AF-1032 | Brand: Adafruit

A gyroscope is a type of sensor that can sense twisting and turning motions. Often paired with an accelerometer, you can use these to do 3D motion capture and inertial measurement (that is - you can tell how an object...

SKU: SF-SEN-13963 | Brand: SparkFun

The SparkFun LIS3DH breakout is a low-power, three-axis accelerometer with 12-bit resolution, ideal for adding motion and orientation detection to your projects. It communicates over I2C or SPI and includes three addi...

SKU: SF-SEN-11446 | Brand: SparkFun

A breakout board for the Analog Devices ADXL362, a 3-axis MEMS accelerometer that operates at ultra-low power consumption. It measures both dynamic acceleration (motion, shock) and static acceleration (tilt), and comm...

SKU: SF-SEN-12909 | Brand: SparkFun

This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes ai...

SKU: SF-GPS-15005 | Brand: SparkFun

Built around the u-blox NEO-M8P-2, this breakout brings high-accuracy GNSS and GPS positioning with RTK support to the Qwiic ecosystem. It’s designed for applications where standard GPS accuracy isn’t enough, with RTK...