Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
Arduino Line Trace Sensor Module
SKU: LB-LR0005 | Brand: Little Bird
The Line Trace Sensor Module uses an infrared emitter/detector pair to measure the reflectivity of a surface below it. When the reflectivity exceeds an adjustable threshold, the output goes low — making it ideal for b...
Delivered by Fri 20 Nov
Adafruit TSL2591 High Dynamic Range Digital Light Sensor
SKU: AF-1980 | Brand: Adafruit
The Adafruit TSL2591 is an ultra-high-range digital light sensor with a massive 600,000,000:1 dynamic range. It features both infrared and full-spectrum photodiodes, allowing you to separately measure infrared, full-s...
Delivered by Fri 20 Nov
LC76G Multi-GNSS Module, Supports GPS, BDS, GLONASS, Galileo, QZSS
SKU: WS-24370 | Brand: Waveshare
The LC76G is a multi-GNSS positioning module that supports GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS satellite systems. It allows multi-system combined or single-system independent positioning for fast, accurate l...
Delivered by Fri 20 Nov
Adafruit VL53L4CD Time of Flight Distance Sensor - ~1 to 1300mm
SKU: AF-5396 | Brand: Adafruit
The Adafruit VL53L4CD is a Time-of-Flight (ToF) distance sensor from ST that combines short-range and medium-range sensing in one chip. It measures from approximately 1 mm right up to 1300 mm, bridging the gap between...
Delivered by Fri 20 Nov
Temperature Sensor Module DS18B20
SKU: LB-24-TEMP | Brand: Little Bird
A pre-wired DS18B20 digital temperature sensor on a breakout module with three labelled pins for easy connection. The DS18B20 uses the 1-Wire protocol, requiring only a single data line to communicate temperature read...
Delivered by Fri 20 Nov
Gravity: Analog Water Pressure Sensor
SKU: DF-SEN0257 | Brand: DFRobot
The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it co...
Delivered by Fri 20 Nov
TMP36 - Analog Temperature sensor [TMP36]
SKU: AF-165 | Brand: Adafruit
The TMP36 is a low-power analog temperature sensor that outputs a voltage proportional to ambient temperature. It operates on 2.7–5.5V and requires no external calibration — simply read the analog voltage and convert ...
Delivered by Fri 20 Nov
Adafruit Universal Thermocouple Amplifier MAX31856 Breakout
SKU: AF-3263 | Brand: Adafruit
The Adafruit Universal Thermocouple Amplifier MAX31856 Breakout reads temperature from virtually any thermocouple type — K, J, N, R, S, T, E, or B — with 0.0078125°C resolution and a measurement range of -210°C to +18...
Delivered by Fri 20 Nov
Atmospheric Pressure Sensor Module
SKU: LB-24-ATMOS | Brand: Little Bird
A compact barometric pressure and temperature sensor module that communicates over I2C. Ideal for weather stations, altitude estimation, and environmental monitoring projects with micro:bit, Arduino, or other microcon...
Delivered by Fri 20 Nov
Adafruit TLV493D Triple-Axis Magnetometer - STEMMA QT / Qwiic
SKU: AF-4366 | Brand: Adafruit
The Adafruit TLV493D is a 3-axis magnetometer designed for detecting and tracking nearby magnets in three dimensions. Manufactured by Infineon, this sensor measures magnetic fields across the X, Y, and Z axes with 12-...
Delivered by Fri 20 Nov
Sound Detection and Microphone Module
SKU: LB-LR0003 | Brand: Little Bird
This sound detection and microphone module provides both analogue and digital outputs for detecting sound with a microcontroller. The analogue output (AO) delivers a real-time voltage signal proportional to sound inte...
Delivered by Fri 20 Nov
Adafruit STEMMA Soil Sensor - I2C Capacitive Moisture Sensor
SKU: AF-4026 | Brand: Adafruit
The Adafruit STEMMA Soil Sensor uses capacitive measurement to detect soil moisture — a more durable approach than resistive sensors that corrode over time. With a single probe and no exposed metal, it avoids oxidatio...
Delivered by Fri 20 Nov
Octopus Analog Capacitive Soil Moisture Sensor
SKU: EF-EF04097 | Brand: ElecFreaks
The Octopus Capacitive Soil Moisture Sensor uses capacitive sensing to detect soil moisture levels, avoiding the corrosion problems common with resistive sensors for a much longer service life. It outputs an analogue ...
Delivered by Fri 20 Nov
Conductive Rubber Sheet / Stretch Sensor- 200mm x 200mm x 1mm
SKU: AF-5463 | Brand: Adafruit
This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play ...
Delivered by Fri 20 Nov
Adafruit Triple-axis Magnetometer - LIS3MDL
SKU: AF-4479 | Brand: Adafruit
The Adafruit LIS3MDL is a triple-axis magnetometer (compass) breakout from ST, with selectable measurement ranges from ±4 gauss (±400 µT) up to ±16 gauss (±1600 µT). It's ideal for detecting magnetic north, measuring ...
Delivered by Fri 20 Nov
Gravity: MCP23017 IIC 16 Digital IO Expansion Module
SKU: DF-DFR0626 | Brand: DFRobot
This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module, the microcontroller can connect 8 modules, and expand ...
Delivered by Fri 20 Nov
PIR (motion) sensor
SKU: AF-189 | Brand: Adafruit
PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensiti...
Delivered by Fri 20 Nov
5pcs NTC 10K Ohm Thermistor Temperature Sensor Cylinder Probe 1m Wire
SKU: LB-10K-5 | Brand: Little Bird
A pack of five NTC thermistor temperature probes, each with a 1-metre wire lead for remote temperature sensing. These 10 KΩ (at 25°C) NTC sensors are sealed in a cylindrical metal probe for durability and are suitable...
Delivered by Fri 20 Nov
Adafruit PMSA003I Air Quality Breakout - STEMMA QT / Qwiic
SKU: AF-4632 | Brand: Adafruit
The Adafruit PMSA003I Air Quality Breakout is a compact laser-scattering particulate matter sensor with an I2C interface — a significant advantage over the UART-based sensors that dominate this category. Simply connec...
Delivered by Fri 20 Nov
Photo cell (CdS photoresistor)
SKU: AF-161 | Brand: Adafruit
CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side o...
Delivered by Fri 20 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared