Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
PIR Motion Sensor
SKU: LB-00158 | Brand: Little Bird
This PIR sensor is suitable for use with Arduino and Raspberry PI. The 3.3v logic level is very handy as it allows you to use this sensor with 3.3v Arduinos like the Due or Pro Mini as well as 5V like the Uno as 3....
Delivered by Wed 10 Jun
Ultrasonic Distance Sensor HC-SR04
SKU: LB-LR0230 | Brand: Little Bird
The HC-SR04 is a widely used ultrasonic distance sensor that measures distances from 2cm to 500cm (approximately 5 metres) with 1cm resolution. It works by emitting a 40kHz ultrasonic pulse, then measuring the time it...
Delivered by Wed 10 Jun
Gravity: Analog Turbidity Sensor For Arduino
SKU: DF-SEN0189 | Brand: DFRobot
The Gravity Analog Turbidity Sensor measures water clarity by detecting the level of suspended particles. It works by measuring light transmittance and scattering rate, which change with the amount of total suspended ...
Delivered by Fri 19 Jun
Arduino Line Trace Sensor Module
SKU: LB-LR0005 | Brand: Little Bird
The Line Trace Sensor Module uses an infrared emitter/detector pair to measure the reflectivity of a surface below it. When the reflectivity exceeds an adjustable threshold, the output goes low — making it ideal for b...
Delivered by Wed 10 Jun
Gravity: Analog Water Pressure Sensor
SKU: DF-SEN0257 | Brand: DFRobot
The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it co...
Delivered by Wed 10 Jun
TCS3200 RGB Color Sensor For Arduino
SKU: DF-SEN0101 | Brand: DFRobot
An RGB colour sensor breakout board based on the TAOS TCS3200 chip, with four built-in white LEDs for illumination. The TCS3200 can detect and measure a wide range of visible colours by converting light intensity to a...
Delivered by Fri 19 Jun
Sound Detection and Microphone Module
SKU: LB-LR0003 | Brand: Little Bird
This sound detection and microphone module provides both analogue and digital outputs for detecting sound with a microcontroller. The analogue output (AO) delivers a real-time voltage signal proportional to sound inte...
Delivered by Wed 10 Jun
PIR (motion) sensor
SKU: AF-189 | Brand: Adafruit
PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensiti...
Delivered by Wed 10 Jun
TCS34725 RGB Color Sensor For Arduino
SKU: DF-SEN0212 | Brand: DFRobot
The TCS34725 is an I2C RGB colour sensor that detects the red, green, and blue components of light in its environment and returns digital colour values. With high sensitivity, a wide dynamic range, and a built-in IR b...
Delivered by Wed 10 Jun
Photo cell (CdS photoresistor)
SKU: AF-161 | Brand: Adafruit
CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side o...
Delivered by Wed 10 Jun
5.8GHz Microwave Radar Module
SKU: DF-SEN0521 | Brand: DFRobot
The 5.8GHz Microwave Radar Module is a high-sensitivity motion detection sensor that transmits and receives 5.8GHz electromagnetic waves. By analysing the difference between transmitted and reflected signals, it relia...
Delivered by Fri 19 Jun
Gravity: Arduino EC (Electrical Conductivity) Sensor / Meter
SKU: DF-DFR0300 | Brand: DFRobot
The Gravity EC (Electrical Conductivity) Sensor measures the conductivity of aqueous solutions, providing an analogue output for Arduino and compatible microcontrollers. EC measurement is essential for monitoring wate...
Delivered by Fri 19 Jun
AGS02MA TVOC Gas Sensor
SKU: LB-LS2708 | Brand: Little Bird
The AGS02MA is a MEMS-based TVOC (Total Volatile Organic Compounds) gas sensor with a calibrated digital signal output. It detects a range of polluting gases including ethanol, ammonia, sulfides, benzene vapours, and ...
Delivered by Wed 10 Jun
Rotary Encoder Module Brick Sensor
SKU: LB-00111 | Brand: Little Bird
Description:The rotary encoder is used to measure the speed and with PWM technology can achieve rapid speed devicesWith fixed bolt hole for easy installationGreat for DIY projectSpecification:Model: KY-040Workin...
Delivered by Wed 10 Jun
T-Slot Photo Interrupter with 1 Meter Cable
SKU: AF-3985 | Brand: Adafruit
This T-Slot Photo Interrupter with Cable is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR...
Delivered by Tue 30 Jun
10-bit ADC (SPI) - 8 Channel
SKU: PI-COM0206 | Brand: Pimoroni
The MCP3008 is a 10-bit analogue-to-digital converter with eight single-ended input channels, communicating via SPI. It's a popular choice for adding analogue inputs to the Raspberry Pi and other digital-only boards —...
Delivered by Wed 10 Jun
Gravity: Arduino ORP Meter V1.0
SKU: DF-SEN0165 | Brand: DFRobot
In the ever-increasing need and awareness for health and safety, water has become a focus point for proper disinfection treatment as aftereffects of industrialization can become a danger for contamination of water...
Delivered by Wed 10 Jun
DIY Gas Detector - Learn to solder
SKU: LB-LS4968 | Brand: Little Bird
MQ-2 Gas Sensor - Smoke & Flammable Gas Detector The MQ-2 is a reliable, easy-to-use gas sensor that’s ideal for detecting flammable gases like LPG, methane, propane, and even smoke. At its core is tin dioxide (SnO₂...
Delivered by Wed 10 Jun
RPLiDAR C1 - DTOF LiDAR 360° Laser Range Scanner (12m, IP54)
SKU: DF-DFR1138 | Brand: DFRobot
##Introduction The RPLIDAR C1 is a new generation fusion-type DTOF (Direct Time of Flight) laser scanner from SLAMTEC. This advanced LIDAR system excels in high-definition detection of small and nearby objects, offeri...
Delivered by Fri 19 Jun
5V IR Photoelectric Switch (4m)
SKU: DF-SEN0523 | Brand: DFRobot
This IR break-beam photoelectric switch detects objects by sending an invisible infrared beam from an emitter to a receiver. When a non-transparent object passes between the two and breaks the beam, the receiver outpu...
Delivered by Fri 19 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
