Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
Temperature Sensor Module DS18B20
SKU: LB-24-TEMP | Brand: Little Bird
A pre-wired DS18B20 digital temperature sensor on a breakout module with three labelled pins for easy connection. The DS18B20 uses the 1-Wire protocol, requiring only a single data line to communicate temperature read...
Delivered by Wed 10 Jun
Sound Detection and Microphone Module
SKU: LB-LR0003 | Brand: Little Bird
This sound detection and microphone module provides both analogue and digital outputs for detecting sound with a microcontroller. The analogue output (AO) delivers a real-time voltage signal proportional to sound inte...
Delivered by Wed 10 Jun
SparkFun PIR Breakout Starter Kit (1uA)
SKU: SF-KIT-19518 | Brand: SparkFun
The SparkFun PIR Breakout Starter Kit includes everything needed to get started with passive infrared motion detection. Built around the Panasonic EKMB1107112 PIR sensor, this kit's breakout board offers ultra-low 1µA...
Delivered by Fri 19 Jun
Temperature and Humidity Sensor Module KY-028
SKU: LB-LR0010 | Brand: Little Bird
Digital TempTemperature sensing module using an NTC thermistor. The output signal at ‘DO’ switches high when the preset (adjustable) temperature is reached. An analog output signal from the sensor is availab...
Delivered by Wed 10 Jun
SparkFun Ultrasonic Distance Sensor - TCT40 (Qwiic)
SKU: SF-SEN-24805 | Brand: SparkFun
The SparkFun Qwiic Ultrasonic Distance Sensor, a user-friendly upgrade to the popular HC-SR04 sensor, offers non-contact distance measurement from 2cm to 400cm with an accuracy of 3mm. This sensor is designed to seaml...
Delivered by Fri 19 Jun
Hackster & DFRobot EEDU Enviromental Sensor Kit (ESP32)
SKU: DF-TEM2022C-EN-1 | Brand: DFRobot
The Hackster and DFRobot EEDU Environmental Sensor Kit provides everything you need to get started with IoT environmental monitoring using an ESP32-based FireBeetle board. Build practical projects that monitor soil mo...
Delivered by Fri 19 Jun
SparkFun PIR Breakout Starter Kit (170uA)
SKU: SF-KIT-19519 | Brand: SparkFun
The SparkFun 170uA PIR Breakout Starter Kit comes with everything you need to get started using Passive Infrared (PIR) sensors. PIR sensors are great for detecting motion in a small area around the sensor. The 170µA S...
Delivered by Fri 19 Jun
Fermion: 8-Bit Level Translator (Breakout)
SKU: DF-DFR0844 | Brand: DFRobot
After purchasing an open-source product that is not electrical level compatible, you may find that your sensor cannot work normally or even is easy to be damaged because the level of the sensor and your controller are...
Delivered by Fri 19 Jun
SparkFun PIR Breakout - 170uA (EKMC4607112K)
SKU: SF-SEN-17372 | Brand: SparkFun
Passive Infrared (PIR) sensors are great for detecting motion in a small area around the sensor. The 170µA SparkFun EKMC4607112K PIR Breakout is a simple board equipped with an EKM-series PIR sensor from Panasonic®. T...
Delivered by Fri 19 Jun
Octopus Mercury Sensor
SKU: EF-EF04006 | Brand: ElecFreaks
The Octopus Mercury Sensor is a tilt and angle detection module based on the mercury switch principle. When tilted, the mercury inside the switch makes or breaks contact, providing a simple way to detect orientation c...
Delivered by Fri 19 Jun
Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070
SKU: AF-1362 | Brand: Adafruit
This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here - just power with 1.8 to 5.5VDC and connect up to 5 conductive pads to the 5 left-...
Delivered by Tue 30 Jun
SparkFun Navigation Switch Breakout
SKU: SF-COM-08236 | Brand: SparkFun
This is a fully assembled simple breakout board for the surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down sel...
Delivered by Wed 10 Jun
SparkFun LED RingCoder Breakout - RGB
SKU: SF-BOB-11040 | Brand: SparkFun
The SparkFun LED RingCoder Breakout provides a visual position indicator for rotary encoders. Two 8-bit shift registers drive a circular LED bargraph that displays the virtual position of the encoder as it turns, givi...
Delivered by Wed 10 Jun
SparkFun Photo Interrupter Breakout Board - GP1A57HRJ00F
SKU: SF-BOB-09322 | Brand: SparkFun
A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate, photodiode, or phototransistor). This PCB has three connections for PWR, GND, and Signal.When the gate is clear, SIG will be high (>...
Delivered by Fri 19 Jun
SparkFun Coulomb Counter Breakout - LTC4150
SKU: SF-BOB-12052 | Brand: SparkFun
Odometers are extremely useful for cars, they tell you how far you have gone, wouldn’t it be nice if you were able to have a device that does the same for electrical current? The LTC4150 SparkFun Coulomb Counter Break...
Delivered by Fri 19 Jun
SparkFun Rotary Encoder Breakout - Illuminated (RG/RGB)
SKU: SF-BOB-11722 | Brand: SparkFun
This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a foo...
Delivered by Wed 10 Jun
Standalone Momentary Capacitive Touch Sensor Breakout [AT42QT1010]
SKU: AF-1374 | Brand: Adafruit
This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
