Sensors & Input

SKU: DF-SEN0536 | Brand: DFRobot

The Gravity SCD41 Infrared CO2 Sensor provides accurate carbon dioxide, temperature, and humidity measurements in a single compact module. Based on Sensirion's SCD41 sensor, it uses photoacoustic NDIR (non-dispersive ...

SKU: DF-TEL0149 | Brand: DFRobot

Note: Gravity: BLE sensor beacons need to be configured using the 3.3V USB-TTL tool. This Gravity wireless BLE Sensor Beacon with built-in 11-bit ADC is capable of collecting data from digital and analog sensors a...

SKU: AF-5423 | Brand: Adafruit

The Adafruit TSC2007 is an I2C resistive touch screen controller that offloads touch reading from your microcontroller. Instead of using multiple analog pins and constant polling, the TSC2007 handles all the touch sen...

SKU: AF-5374 | Brand: Adafruit

The Adafruit ADXL375 is a high-G triple-axis accelerometer capable of measuring up to ±200g of force. It communicates via I2C or SPI and includes STEMMA QT connectors for solderless I2C connections. An on-board 3.3V r...

SKU: DF-SEN0428 | Brand: DFRobot

The SHT4X is the 4th generation digital temperature and humidity sensor from Sensirion. In line with Sensirion’s industry-proven humidity and temperature sensors, the SHT40 offers consistent high accuracy within measu...

SKU: SF-SEN-18364 | Brand: SparkFun

The DHT20 is a factory-calibrated digital humidity and temperature sensor with an I²C interface. An upgrade to the popular DHT11/DHT22 series, it provides reliable environmental measurements without requiring addition...

SKU: AF-4808 | Brand: Adafruit

The Adafruit EMC2101 breakout is an I2C fan controller and temperature sensor that makes it easy to integrate 3-pin or 4-pin PC fans into your projects. The Microchip/SMSC EMC2101 handles PWM speed control and tachome...

SKU: EF-EF04024 | Brand: ElecFreaks

This is a Rain/steam sensor from ElecFreaks. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up.You even co...

SKU: AF-1231 | Brand: Adafruit

The ADXL345 from Analog Devices is a triple-axis digital accelerometer with both I2C and SPI interfaces. This breakout board includes an on-board 3.3V regulator and logic-level shifting, making it easy to interface wi...

SKU: AF-3984 | Brand: Adafruit

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, bas...

SKU: AF-1602 | Brand: Adafruit

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has ...

SKU: AF-2809 | Brand: Adafruit

The Adafruit LIS3DH is a popular, low-power triple-axis accelerometer breakout packed with features typically found only on higher-end sensors. With selectable measurement ranges, multiple interface options, and built...

SKU: AF-372 | Brand: Adafruit

An epoxy-coated precision NTC thermistor with a 10kΩ resistance at 25°C and ±1% accuracy. The resistance decreases as temperature rises and increases as it cools, making it straightforward to measure temperature with ...

SKU: DF-SEN0224 | Brand: DFRobot

DFRobot presents the ultra low-power Arduino triple axis accelerometer! This device is based around a MEMS LIS2DH chip solution and has high-performance ultra-low power mode. The module is fitted with a Gravity I2...

SKU: AF-5912 | Brand: Adafruit

The Adafruit SHT41 Trinkey is a tiny USB A device that combines an ATSAMD21 microcontroller with a Sensirion SHT41 temperature and humidity sensor. Simply plug it into any USB A port on your computer and start reading...

SKU: DF-SEN0467 | Brand: DFRobot

This is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentra...

SKU: DF-SEN0570 | Brand: DFRobot

Fermion: MEMS Smoke Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat...

SKU: DF-SEN0571 | Brand: DFRobot

Fermion: MEMS Odor Smell Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal...

SKU: DF-SEN0567 | Brand: DFRobot

Fermion: MEMS Ammonia NH3 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...

SKU: SF-SEN-13905 | Brand: SparkFun

The SparkFun BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature in a compact package. This version comes with headers pre-soldered for easy breadboard use or direct wir...