Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
Raspberry Pi Sense HAT rev.2
SKU: RP-SC0329 | Brand: Raspberry Pi Ltd
Raspberry Pi Sense HAT V2 — Your Mission Control for Data, Dazzle, and DIY Experiments!What if your Raspberry Pi could sense everything—orientation, weather, movement, your own code-controlled lightshow…and let you in...
Delivered by Wed 10 Jun
Waterproof DS18B20 Digital Temperature Sensor For Arduino
SKU: DF-DFR0198 | Brand: DFRobot
This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PV...
Delivered by Wed 10 Jun
Light-dependent Resistor Sensor Module
SKU: LB-24-LIGHT | Brand: Little Bird
Light-dependent resistors are electronic components whose resistance changes with light intensity. They are also called LDRs, photoresistors, or photoconductors. It has four pins:3.3V : While 'VCC'...
Delivered by Wed 10 Jun
SparkFun Load Cell Amplifier - HX711
SKU: SF-SEN-13879 | Brand: SparkFun
The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the...
Delivered by Wed 10 Jun
Flame Sensor Module KY-026
SKU: LB-LR0007 | Brand: Little Bird
Flame Detection Sensor Module for use with Arduino Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive60 degree detection sensor Two outputs mode: AO: analog output, real-time ou...
Delivered by Wed 10 Jun
Waterproof DS18B20 Temperature Probe 1M with XH2.54mm Connector
SKU: LB-LS4690 | Brand: Little Bird
Digital temperature sensor DS18B20, waterproof case. Working range from -55 to 125 degrees. Resolution 0.5 in range from -10 up to 85 degrees.
Delivered by Wed 10 Jun
Sonar:bit for micro:bit Ultrasonic Sensor Distance Measuring 3V/5V
SKU: EF-EF04089 | Brand: ElecFreaks
Sonar:bit is a 3-wire ultrasonic distance sensor designed for micro:bit and Arduino projects. Operating on 3–5V, it works directly with both 3.3V and 5V systems using a single GVS cable — saving an I/O port compared t...
Delivered by Wed 10 Jun
Temperature Sensor - Waterproof (DS18B20)
SKU: SF-SEN-11050 | Brand: SparkFun
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire i...
Delivered by Wed 10 Jun
SparkFun Logic Level Converter - Bi-Directional
SKU: SF-BOB-12009 | Brand: SparkFun
The SparkFun Bi-Directional Logic Level Converter safely translates signals between different voltage levels — stepping 5V down to 3.3V and 3.3V up to 5V on the same channel. It also works with 2.8V and 1.8V devices, ...
Delivered by Wed 10 Jun
Waterproof DS18B20 Sensor Kit
SKU: DF-KIT0021 | Brand: DFRobot
A waterproof DS18B20 digital temperature sensor kit with everything you need to connect to an Arduino. The stainless steel probe measures temperatures from -55°C to +125°C over a 1-Wire interface, requiring just one d...
Delivered by Wed 10 Jun
Logic Level Converter 8 Channels Bi-Directional
SKU: LB-LR0214-110A | Brand: Little Bird
Raspberry Pi 8 channel Level Switching (3.5V to 5V) IO Module Logic Level Converter is able to convert signals from 5V down to 3.3V (and vice versa) meaning you can safely use 5V or 3.3V devices with the Raspberry ...
Delivered by Wed 10 Jun
Temperature Sensor Module DS18B20
SKU: LB-24-TEMP | Brand: Little Bird
A pre-wired DS18B20 digital temperature sensor on a breakout module with three labelled pins for easy connection. The DS18B20 uses the 1-Wire protocol, requiring only a single data line to communicate temperature read...
Delivered by Wed 10 Jun
Reed Switch
SKU: SF-COM-08642 | Brand: SparkFun
This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the ...
Delivered by Wed 10 Jun
Sound Detection and Microphone Module
SKU: LB-LR0003 | Brand: Little Bird
This sound detection and microphone module provides both analogue and digital outputs for detecting sound with a microcontroller. The analogue output (AO) delivers a real-time voltage signal proportional to sound inte...
Delivered by Wed 10 Jun
Rain Drop Sensor Module
SKU: LB-24-RAIN | Brand: Little Bird
Give your projects weather awareness in seconds. This compact module detects the very first drop of rain and reports the strength of the shower, making it ideal for smart gardens, automatic window controls, mini weat...
Delivered by Wed 10 Jun
Rotary Encoder
SKU: SF-COM-09117 | Brand: SparkFun
This is a 12-step rotary encoder with a nice ‘clicking’ feel. It’s breadboard friendly, and has a pretty handy select switch (by pushing in on the knob). The encoder is different from a potentiometer in that an enc...
Delivered by Wed 10 Jun
ESP32-H2-DevKitM-1 - 4 MB Flash
SKU: AF-5715 | Brand: Adafruit
The ESP32-H2-DevKitM-1 is an entry-level development board based on the ESP32-H2-MINI-1 module, featuring Bluetooth Low Energy 5, IEEE 802.15.4, Thread, Matter, and Zigbee support on a single chip. It's an ultra-low-p...
Delivered by Wed 10 Jun
ESP32-S3-WROOM-1-N4 Module (PCB Antenna)
SKU: DF-DFR0896 | Brand: DFRobot
The ESP32-S3-WROOM-1-N4 is a powerful Wi-Fi and Bluetooth LE MCU module built around the ESP32-S3 SoC. Featuring a dual-core Xtensa LX7 processor running at up to 240MHz, 4MB SPI flash, and hardware acceleration for n...
Delivered by Wed 10 Jun
Temperature Sensor - High Temperature, Waterproof (DS18B20)
SKU: SF-SEN-18367 | Brand: SparkFun
A sealed, waterproof DS18B20 digital temperature probe for precise measurements in wet or harsh environments. The sensor communicates over a 1-Wire interface, requiring just one data pin (plus ground) to connect to yo...
Delivered by Wed 10 Jun
Reed Switch - Insulated
SKU: SF-COM-10601 | Brand: SparkFun
An insulated reed switch that closes when exposed to a magnetic field and opens when the field is removed. The encapsulated design is more durable than glass reed switches and can be easily populated on a PCB. Key Fe...
Delivered by Wed 10 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
