Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
Joystick Shield for Arduino
SKU: EC-ACS77312JS | Brand: Elecrow
Turn your Arduino into a simple game controller with this plug-and-play joystick shield. It features a two-axis thumb joystick with a select button plus four additional momentary push buttons — giving you retro game-p...
Delivered by Fri 20 Nov
Sound Detection and Microphone Module
SKU: LB-LR0003 | Brand: Little Bird
This sound detection and microphone module provides both analogue and digital outputs for detecting sound with a microcontroller. The analogue output (AO) delivers a real-time voltage signal proportional to sound inte...
Delivered by Fri 20 Nov
Conductive Rubber Sheet / Stretch Sensor- 200mm x 200mm x 1mm
SKU: AF-5463 | Brand: Adafruit
This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play ...
Delivered by Fri 20 Nov
Mini Load Cell - 100g, Straight Bar (TAL221)
SKU: SF-SEN-14727 | Brand: SparkFun
This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 100g of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that cha...
Delivered by Fri 20 Nov
Adafruit Feather M0 Adalogger
SKU: AF-2796 | Brand: Adafruit
The Feather M0 Adalogger is an all-in-one datalogger built around the ATSAMD21G18 ARM Cortex M0 processor, with a built-in MicroSD card holder, native USB, and LiPo battery charging. With 256KB of flash and 32KB of RA...
Delivered by Fri 20 Nov
Force Sensitive Resistor 0.5
SKU: SF-SEN-09375 | Brand: SparkFun
This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the ...
Delivered by Fri 20 Nov
5pcs NTC 10K Ohm Thermistor Temperature Sensor Cylinder Probe 1m Wire
SKU: LB-10K-5 | Brand: Little Bird
A pack of five NTC thermistor temperature probes, each with a 1-metre wire lead for remote temperature sensing. These 10 KΩ (at 25°C) NTC sensors are sealed in a cylindrical metal probe for durability and are suitable...
Delivered by Fri 20 Nov
ESP-WROOM-32 (ESP32 WiFi-BT-BLE MCU Module)
SKU: EC-WCW32110W | Brand: Elecrow
The ESP-WROOM-32 is Espressif's powerful Wi-Fi, Bluetooth Classic, and BLE module built around the ESP32 dual-core processor. It's a versatile platform for IoT applications ranging from low-power sensor networks to de...
Delivered by Fri 20 Nov
Mini Photocell
SKU: SF-SEN-09088 | Brand: SparkFun
This is a very small light sensor. A photocell changes (also called a photodetector, photo resistor, CdS or photoconductive cell) resistance depending on the amount of light it is exposed to. These little sensors make...
Delivered by Fri 20 Nov
Photo cell (CdS photoresistor)
SKU: AF-161 | Brand: Adafruit
CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side o...
Delivered by Fri 20 Nov
SparkFun Single Lead Heart Rate Monitor - AD8232
SKU: SF-SEN-12650 | Brand: SparkFun
The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as a...
Delivered by Fri 20 Nov
ESP32-S3-WROOM-1-N4 Module (PCB Antenna)
SKU: DF-DFR0896 | Brand: DFRobot
The ESP32-S3-WROOM-1-N4 is a powerful Wi-Fi and Bluetooth LE MCU module built around the ESP32-S3 SoC. Featuring a dual-core Xtensa LX7 processor running at up to 240MHz, 4MB SPI flash, and hardware acceleration for n...
Delivered by Fri 20 Nov
Audio Stereo Decoder Module Board 3.3V - 5V
SKU: LB-LS1891 | Brand: Little Bird
HS1891 DAC Module CJMCU-1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board 3.3V - 5V Feature: This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. ...
Delivered by Fri 20 Nov
Octopus Analog UV sensor (GUVA-S12SD)
SKU: EF-EF04093 | Brand: ElecFreaks
Octopus Analog UV sensor (GUVA-S12SD) is the UV electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the...
Delivered by Fri 20 Nov
Potentiometer Module
SKU: LB-LS1673 | Brand: Little Bird
This Potentiometer Module is from our Micro:bit 24 bit kit. You're probably already familiar with using a potentiometer as they are commonly found on many electrical devices, such as in audio equipment where they a...
Delivered by Fri 20 Nov
SparkFun Line Sensor Breakout - QRE1113 (Analog)
SKU: SF-ROB-09453 | Brand: SparkFun
This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applic...
Delivered by Fri 20 Nov
Gravity: Arduino Analog Flame Sensor
SKU: DF-DFR0076 | Brand: DFRobot
This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefig...
Delivered by Fri 20 Nov
Conductive Rubber Sheet / Stretch Sensor- 200mm x 200mm x 0.5mm
SKU: AF-5464 | Brand: Adafruit
This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play ...
Delivered by Fri 20 Nov
Optical Detector / Phototransistor - QRD1114
SKU: SF-SEN-00246 | Brand: SparkFun
This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm).
Delivered by Fri 20 Nov
Gravity: Arduino LM35 Temperature Sensor
SKU: DF-DFR0023 | Brand: DFRobot
This is an Arduino Temperature Sensor based on LM35 temperature chip. A Temperature Sensor can be used to detect ambient air temperature.The LM35 chip is produced by National Semiconductor Corporation and offers a fun...
Delivered by Fri 20 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared