Robotics & Motion

SKU: EF-11098 | Brand: ElecFreaks

This compact DC micro submersible pump from ElecFreaks operates at 3V, making it easy to integrate into microcontroller-based projects. It comes equipped with male and female Dupont connectors for quick and simple wir...

SKU: AF-2348 | Brand: Adafruit

The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed...

SKU: LB-LS1017-60 | Brand: Little Bird

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. This 60 RPM variant uses a higher gear ratio for increased torque at lower speed, making it well-suite...

SKU: SF-ROB-11696 | Brand: SparkFun

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much res...

SKU: DF-SEN0158 | Brand: DFRobot

Want a robot to hunt down heat objects or navigated with fire? This is a small form factor IR camera capable of tracking up to four heat/IR sources. The applications are plenty and can go from tracking of robots wi...

SKU: EC-MCS02930M | Brand: Elecrow

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive ...

SKU: EF-EF08209 | Brand: ElecFreaks

Documents Smart Cutebot kit

SKU: DF-ROB0148-EN-1 | Brand: DFRobot

FEATURES Support for Makecode, will support Scratch and python later. Small size, flexible movement. All-metal miniature gear motor, good quality, strong driving force. Line patrol, ambient light, LED lights, ultrason...

SKU: AF-3896 | Brand: Adafruit

A 3-bladed trifoil propeller designed to snap onto standard DC hobby motors. Great for making simple fans, wind-powered experiments, bubble machines, or lightweight propulsion projects. Key Features Snap-On Fit – P...

SKU: AF-3297 | Brand: Adafruit

The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applic...

SKU: AF-373 | Brand: Adafruit

This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type which snap into breadboards or perfboar...

SKU: DF-FIT0800 | Brand: DFRobot

A compact amphibious micro submersible pump perfect for building small fountains, automated plant watering systems, and DIY water projects. Powered by 3–6V DC, it features low noise operation, high efficiency, and eas...

SKU: LB-LS3639 | Brand: Little Bird

A 122-piece assortment of wheels, motors, and gears for quick prototyping and hands-on tinkering. This kit gives you the mechanical building blocks to create simple motorised chassis, spinning art projects, and other ...

SKU: DF-DFR0251 | Brand: DFRobot

A relay is an electrically operated switch, which has a control system (also known as the input circuit) and the controlled system (also known as the output circuit), usually used in automatic control circuit. It i...

SKU: SF-ROB-13259 | Brand: SparkFun

These are a pair of basic, 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs right angle gear motors utilized in the Magician Chassis and RedBot Kit. With these wheels you ...

SKU: AF-815 | Brand: Adafruit

The Adafruit 16-Channel PWM/Servo Driver uses the PCA9685 chip to provide 16 channels of 12-bit PWM output over I2C. With a built-in clock, the driver runs independently — no need to continuously send signals from you...

SKU: KS-KS4033 | Brand: Keyestudio

The micro:bit DRV8833 Motor Driver Expansion Board adds dual DC motor control to the BBC micro:bit. Built around the DRV8833CPWP motor driver IC, it can output up to 700 mA per channel with four control modes: clockwi...

SKU: DF-ROB0156-L | Brand: DFRobot

Note: Maqueen, micro:bit board and battery are not included. Maqueen Loader includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as, metal servo, mecha...

SKU: SF-SEN-14709 | Brand: SparkFun

The AH1815 is an integrated Hall-Effect non-latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sen...

SKU: AF-3416 | Brand: Adafruit

The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution ...