Resistors

A pack of 8 metal film resistors rated at 47 kΩ and 0.5W (½W). These through-hole axial resistors offer 1% tolerance for accurate circuit design, a...

A pack of 8 metal film resistors rated at 100KΩ and 0.5W. Despite the half-watt power rating, these are the same physical size as standard 1/4W car...

A 74LS27 triple 3-input NOR gate IC in a through-hole DIP-14 package. Contains three independent 3-input NOR gates for digital logic design and sig...

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000...

A 2×5 (10-pin) shrouded box header on standard 0.1" (2.54 mm) pitch. The keyed shroud prevents reversed cable connections, making it ideal for prog...

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limi...

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-d...

A pack of eight 120Ω metal film resistors rated at 0.5W (½W) with 1% tolerance. Despite the higher power rating, these resistors are the same physi...

A pack of eight 300Ω metal film resistors rated at 0.5W (½W) with 1% tolerance. These through-hole axial resistors are the same physical size as st...

A pack of 8 metal film resistors rated at 470Ω and 0.5W (½W). These through-hole axial resistors offer 1% tolerance for accurate circuit design, an...

10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Visha...

Resonators function like crystals but stick closer to their specified frequency over a full temperature range. These resonators are +/-0.5% or bett...

This is a basic, general-purpose red LED in a standard T1 (3mm) package with 0.1" lead spacing.

An epoxy-coated precision NTC thermistor with a 10kΩ resistance at 25°C and ±1% accuracy. The resistance decreases as temperature rises and increas...

This little piece of notched plastic is a Resistor Lead Bending Tool. Sometimes referred to as a “forming” tool, this little guy provides you with ...

A pack of 2 ceramic disc capacitors rated at 100pF and 50V DC. Ceramic capacitors are non-polarised, making them suitable for both AC and DC circui...

A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol ...

INTRODUCTION Introducing "The Breadboard-Plugin Kit" - the first kit in the ECell series. The Breadboard-Plugin Ki...

This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR from Interlink Electronics will vary its res...

This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much pressure is bein...