Raspberry Pi

SKU: DF-SEN0654 | Brand: DFRobot

This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas s...

SKU: DF-SEN0664 | Brand: DFRobot

Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help...

SKU: DF-SEN0475 | Brand: DFRobot

Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industria...

SKU: DF-SEN0639 | Brand: DFRobot

This compact digital anemometer measures air velocity for embedded electronics and intelligent control systems. It is built around the Posifa PAV3015D thermal sensing element, using temperature differences across a th...

SKU: DF-SEN0469 | Brand: DFRobot

This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...

SKU: AF-6358 | Brand: Adafruit

Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the ...

SKU: SF-COM-28236 | Brand: SparkFun

This add-on board solves a common Raspberry Pi Pico HAT problem: fixed orientation. It takes the standard pinout for a Raspberry Pi Pico development board and flips it as if the Pico had been physically rotated over, ...

SKU: DF-DFR0767-2 | Brand: DFRobot

This compact kit provides a networking carrier platform for the Raspberry Pi Compute Module 4 series, suited to embedded routing, gateway and edge networking projects. It is designed for dual-gigabit networking using ...

SKU: DF-DFR0767-3 | Brand: DFRobot

This kit bundles DFRobot’s compact Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, a 5V@3A USB power supply (US Standard), and a USB 3.0 to Type-C cable. It is designed around t...

SKU: DF-DFR0767-4 | Brand: DFRobot

Turn a Raspberry Pi Compute Module 4 into a compact dual-Gigabit router, gateway or IoT platform with this mini carrier board kit from DFRobot. The board connects a Gigabit network card over PCIe, giving the CM4 two f...

SKU: DF-DFR0767-1 | Brand: DFRobot

This pack combines a Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, giving you a compact platform for building a Raspberry Pi CM4-based router, gateway or IoT hub.The carrier b...

SKU: DF-SEN0651 | Brand: DFRobot

This compact AI camera module brings on-board vision inferencing to Raspberry Pi projects using the Sony IMX500 Intelligent Vision Sensor. It combines a 12.3-megapixel CMOS image sensor with integrated AI processing, ...

SKU: DF-SEN0671 | Brand: DFRobot

Instead of measuring just one dot, the TF-NOVA projects a wide 14° by 1° curtain of laser light to create a continuous line of detection. At 1 metre, that line covers 25cm x 1.7cm, helping automated machines spot thin...

SKU: DF-SEN0646 | Brand: DFRobot

This ultra-compact dToF laser ranging sensor uses 940nm laser pulses to measure distance up to 7.8 metres with typical ±4cm accuracy. It is designed for precise, real-time ranging in compact robotics, drone, IoT and a...

SKU: DF-DFR0910 | Brand: DFRobot

This 10.1-inch capacitive touchscreen is a Raspberry Pi-based industrial screen packaged for use in Linux-driven industrial environments. It supports LVDS multi-touch with a 1280*800 image resolution and a 16:9 format...

SKU: SF-PRT-30977 | Brand: SparkFun

This cover is a dedicated mounting accessory for compatible Akasa fanless Raspberry Pi enclosures. It replaces or supplements the standard enclosure panel so the case can be attached to the back of a display or anothe...

SKU: SF-PRT-17907 | Brand: SparkFun

This header kit gives you the solderable pins needed to connect a Raspberry Pi Pico to a breadboard or another circuit. It includes the matching header set for the Pico layout, making it a straightforward option for p...

SKU: SF-CAB-28269 | Brand: SparkFun

This single-port 30W PoE+ injector lets you send power and data to a PoE-enabled Raspberry Pi over one Ethernet cable. It is intended for Raspberry Pi single board computers from the Raspberry Pi 3B+ onwards, excludin...

SKU: SF-PRT-29327 | Brand: SparkFun

Build a neater, sturdier Raspberry Pi stack with this hardware kit for mounting a standard Pi HAT. It is designed for Raspberry Pi 3, 4 and 5 boards, including builds where a larger cooling fan or heat sink needs extr...

SKU: SF-GPS-29061 | Brand: SparkFun

Add modular GNSS positioning to a Raspberry Pi or similar single-board computer with this compact SparkPNT GNSS Flex receiver module. It is built around the u-blox DAN-F10N and is designed for reliable metre-level pos...