Raspberry Pi Sensors

SKU: AF-6455 | Brand: Adafruit

Build a digital nose for indoor air quality projects with this SGP41 gas sensor breakout. The Sensirion SGP41 is a fully integrated MOX gas sensor with I2C interfacing, so you do not need to manage heater control or a...

SKU: SF-GPS-29891 | Brand: SparkFun

Build high-accuracy GNSS projects on a Raspberry Pi with this GNSS Flex pHAT and matched LG290P plus IM19 module. It combines Quectel's quad-band LG290P RTK receiver with the Feyman IM19 IMU for centimetre-level posit...

SKU: SF-GPS-29888 | Brand: SparkFun

Build high-accuracy positioning projects around a Raspberry Pi with this GNSS Flex pHAT and included ZED-X20P and IM19 module. It combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU for centim...

SKU: SF-GPS-29890 | Brand: SparkFun

Add precise position and orientation data to a Raspberry Pi with this GNSS Flex pHAT and LG580P module combination. It is built for advanced navigation projects that need centimetre-level RTK positioning plus real-tim...

SKU: SF-GPS-29889 | Brand: SparkFun

Add survey-grade positioning to a Raspberry Pi with this GNSS Flex pHAT bundle, combining a Flex pHAT carrier, Septentrio mosaic-X5 RTK GNSS receiver and Feyman IM19 IMU. It is designed for high-precision positioning,...

SKU: SF-GPS-30384 | Brand: SparkFun

Add survey-grade GNSS positioning to a Raspberry Pi while keeping size, weight and power demands low. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 module, built around Septentrio’s compact mosai...

SKU: DF-SEN0654 | Brand: DFRobot

This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas s...

SKU: DF-SEN0664 | Brand: DFRobot

Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help...

SKU: DF-SEN0475 | Brand: DFRobot

Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industria...

SKU: DF-SEN0639 | Brand: DFRobot

This compact digital anemometer measures air velocity for embedded electronics and intelligent control systems. It is built around the Posifa PAV3015D thermal sensing element, using temperature differences across a th...

SKU: DF-SEN0469 | Brand: DFRobot

This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...

SKU: DF-SEN0705 | Brand: DFRobot

This flexible tactile pressure sensor gives your project a compact 4 x 8 pressure matrix for mapping contact across a small surface. It integrates 32 independent sensing points in a 20 x 10mm active area, making it us...

SKU: DF-SEN0704 | Brand: DFRobot

This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-ti...

SKU: DF-SEN0671 | Brand: DFRobot

Instead of measuring just one dot, the TF-NOVA projects a wide 14° by 1° curtain of laser light to create a continuous line of detection. At 1 metre, that line covers 25cm x 1.7cm, helping automated machines spot thin...

SKU: DF-SEN0646 | Brand: DFRobot

This ultra-compact dToF laser ranging sensor uses 940nm laser pulses to measure distance up to 7.8 metres with typical ±4cm accuracy. It is designed for precise, real-time ranging in compact robotics, drone, IoT and a...

SKU: SF-GPS-29061 | Brand: SparkFun

Add modular GNSS positioning to a Raspberry Pi or similar single-board computer with this compact SparkPNT GNSS Flex receiver module. It is built around the u-blox DAN-F10N and is designed for reliable metre-level pos...

SKU: AF-6049 | Brand: Adafruit

Add digital audio input to a capable microcontroller or single-board computer with this tiny breakout for the TDK ICS43434 I2S MEMS microphone. MEMS microphones detect sound like classic electret mics, but are much sm...

SKU: AF-6064 | Brand: Adafruit

Need approximate distance sensing over tens of centimetres to around a metre, plus ambient light measurement from the same board? This breakout carries Vishay’s VCNL4200, a two-in-one IR proximity and ambient light se...

SKU: PR-PIM181 | Brand: Little Bird

Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, colour, 3-axis motion, compass heading, and analog inputs. That's up to 10 different variables!It's ideal for monitoring c...

SKU: AF-6335 | Brand: Adafruit

A modern take on the common RGB colour sensor — the OPT4048 provides true CIE XYZ tri-stimulus output so you can match readings directly to standard colour spaces. It also calculates colour temperature (based on CIE) ...