Raspberry Pi PoE+ HAT (Compatible with Raspberry Pi 4B / 3B+)

##Introduction The Raspberry Pi PoE+ HAT, a compatible expansion board for Raspberry Pi 3B+/4B, is designed to enhance your Raspberry Pi by adding PoE+ capabilities to its Ethernet port. It stands out with its superior heat dissipation and increased power capacity. Support for 802.3af PoE Network Standard This allows a Raspberry Pi to be powered and connected to the network using a single Ethernet cable, simplifying the setup process and reducing cable clutter.Fully Isolated Switch Mode Power Supply (SMPS) Equipped with a fully isolated Switch Mode Power Supply (SMPS), the Raspberry Pi PoE+ HAT ensures a stable and efficient power supply. This protects the device from potential damage caused by power surges and fluctuations.37-57V DC Input and 5V/5A DC Output With a 37-57V DC input and a 5V/5A DC output, the Raspberry Pi PoE+ HAT provides sufficient power to handle a Raspberry Pi 3B+/4B under maximum load. This ensures that power-intensive applications can run without any power shortages.25mm x 25mm Brushless Cooling Fan This helps to maintain an optimal temperature for the Raspberry Pi, ensuring optimal performance and longevity of the device.Hardware Connection StepsBefore installing the PoE HAT, first install the provided standoffs at the four corners of the circuit board.Align the PoE HAT with the 40-pin and 4-pin PoE interfaces of the Raspberry Pi and connect them.After connecting the PoE HAT board, you can power and connect to the network through an Ethernet cable connected to a PoE device.When removing the PoE HAT, pull evenly to make the module smoothly detach from the Raspberry Pi pin header, avoiding bending the pins.PrecautionsOnly PoE devices that comply with the 802.3af standard can be used for power supply.The external power supply used by Raspberry Pi should comply with the relevant regulations and standards applicable to the intended use.It should be operated in a well-ventilated environment and should not be used in an enclosed manner.During use, it should be placed on a stable, flat, non-conductive surface and should not come into contact with conductive items.Do not block or obstruct the fan, and do not insert anything into the fan.Do not expose this product to water, humid environments, or high-temperature environments. This product is designed to operate under normal room temperatures.Care must be taken during use to avoid mechanical or electrical damage to the printed circuit board and connectors. ##Specification Model: IEEE 802.3at-2003 PoEInput Voltage: 37-57V DCOutput Power: 5V/5A DC outputOperating Temperature: 0~50℃ ##Documents Product Brief ##ShippingList Raspberry Pi PoE+ HAT × 1