Raspberry Pi Hats
Raspberry Pi HATs (Hardware Attached on Top) are expansion boards that plug directly onto your Pi's GPIO header, adding capabilities like motor control, displays, LoRa networking, servo drivers, and more. Whether you're building a robotics project, IoT gateway, or custom interface, there's a HAT to suit.
Popular with Australian makers, educators, and hobbyists, these boards cover everything from E-Ink screens and OLED displays to PWM controllers and GPS modules. Fast local shipping means your next STEM or maker project won't be held up waiting.
2.13inch E-Paper HAT (G), 250x122, Red/Yellow/Black/White, SPI Interface
SKU: WS-24908 | Brand: Waveshare
A 2.13″ four-colour e-paper display HAT from Waveshare that plugs directly onto a Raspberry Pi via the standard 40-pin GPIO header. The panel renders red, yellow, black, and white ink for vivid, attention-grabbing con...
Delivered by Fri 12 Jun
960×680, 13.3inch E-Ink display HAT (K) for Raspberry Pi, SPI interface
SKU: WS-25726 | Brand: Waveshare
A 13.3-inch e-Paper display HAT for the Raspberry Pi, featuring a 960×680 resolution black and white panel with over 170° viewing angle. The e-ink technology requires no backlight — it reflects ambient light like prin...
Delivered by Fri 12 Jun
Raspberry Pi 2-Channel Isolated CAN Expansion HAT
SKU: WS-17912 | Brand: Waveshare
Add reliable, isolated CAN bus communication to your Raspberry Pi with this dual-channel expansion HAT. Built around the MCP2515 CAN controller and SN65HVD230 transceiver, it provides two fully independent CAN channel...
Delivered by Fri 12 Jun
PaPiRus 2.7 eInk Display HAT for Raspberry Pi from Pi Supply
SKU: AF-3420 | Brand: Adafruit
The PaPiRus Screen HAT from Pi Supply is an ePaper / eInk screen HAT designed for the Raspberry Pi. Think of it as the older sibling of the PaPiRus Zero.ePaper / eInk is a display technology that mimics the appearance...
Delivered by Fri 12 Jun
1872×1404, 10.3inch flexible E-Ink display HAT for Raspberry Pi
SKU: WS-16712 | Brand: Waveshare
A large 10.3" flexible e-ink display HAT for Raspberry Pi, featuring 1872×1404 resolution (~227 DPI) with 2–16 greyscale levels. The flexible panel is thinner and lighter than standard e-Paper displays, and the IT8951...
Delivered by Fri 3 Jul
Adafruit 2.13 Monochrome E-Ink Bonnet for Raspberry Pi - THINK INK
SKU: AF-4687 | Brand: Adafruit
The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying h...
Out of stock
