Raspberry Pi Hats
Raspberry Pi HATs (Hardware Attached on Top) are expansion boards that plug directly onto your Pi's GPIO header, adding capabilities like motor control, displays, LoRa networking, servo drivers, and more. Whether you're building a robotics project, IoT gateway, or custom interface, there's a HAT to suit.
Popular with Australian makers, educators, and hobbyists, these boards cover everything from E-Ink screens and OLED displays to PWM controllers and GPS modules. Fast local shipping means your next STEM or maker project won't be held up waiting.
40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6 long
SKU: AF-4823 | Brand: Adafruit
A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board...
Delivered by Wed 12 Aug
Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM
SKU: AF-2310 | Brand: Adafruit
The Adafruit Perma-Proto HAT for Pi Mini Kit is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header (Pi Zero, A+, B+, Pi 2, 3, 4, 5). It provides a grid of 0.1″ soldering holes connect...
Delivered by Wed 12 Aug
Adafruit CYBERDECK Bonnet for Raspberry Pi 400
SKU: AF-4862 | Brand: Adafruit
The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input ...
Delivered by Wed 12 Aug
Adafruit PiTFT 2.2 HAT Mini Kit - 320x240 2.2 TFT - No Touch
SKU: AF-2315 | Brand: Adafruit
The Adafruit PiTFT 2.2" HAT Mini Kit is a compact colour display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.2-inch 320×240 pixel TFT with 16-bit colour, it's perfect for use as a mini cons...
Delivered by Wed 12 Aug
Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi [Mini Kit]
SKU: AF-3346 | Brand: Adafruit
The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D ampli...
Delivered by Wed 12 Aug
Adafruit 2.13 Monochrome E-Ink Bonnet for Raspberry Pi - THINK INK
SKU: AF-4687 | Brand: Adafruit
The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying h...
Delivered by Wed 12 Aug
Adafruit Mini PiTFT - 135x240 Color TFT Add-on for Raspberry Pi
SKU: AF-4393 | Brand: Adafruit
The Adafruit Mini PiTFT 1.14" is a compact 135×240 pixel IPS colour display that snaps directly onto any Raspberry Pi via the GPIO header. Its slim widescreen format is perfect for status bars, scrolling text, or comp...
Delivered by Wed 12 Aug
Adafruit 128x64 OLED Bonnet for Raspberry Pi
SKU: AF-3531 | Brand: Adafruit
The Adafruit 128×64 OLED Bonnet is a compact display add-on for Raspberry Pi, featuring a 1.3" diagonal monochrome OLED screen with a 5-way joystick and two pushbuttons. The high-contrast white OLED pixels are individ...
Delivered by Wed 12 Aug
Adafruit Prototyping Pi Plate Kit for Raspberry Pi
SKU: AF-801 | Brand: Adafruit
The Adafruit Prototyping Pi Plate Kit snaps onto your Raspberry Pi and provides a generous prototyping area with all GPIO, I2C, SPI, and power pins broken out to labelled 0.1" strips and 3.5 mm screw-terminal blocks. ...
Delivered by Wed 12 Aug
2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets
SKU: AF-4079 | Brand: Adafruit
This 2×20 female socket riser header features slightly longer-than-standard pins, adding extra height between your Raspberry Pi and any HAT, Bonnet, or pHAT mounted on top. This additional clearance helps boards clear...
Delivered by Wed 12 Aug
Adafruit EYESPI Pi Beret - Buttons, EYESPI and STEMMA QT
SKU: AF-5783 | Brand: Adafruit
The EYESPI Pi Beret is a slim HAT for Raspberry Pi that provides an EYESPI display connector, STEMMA QT port, buttons, and a slide switch — everything you need to add a colour TFT or E-Ink display and sensors to your ...
Delivered by Wed 12 Aug
