Raspberry Pi Accessories

SKU: DF-FIT0672 | Brand: DFRobot

A 30cm flat flex cable (FFC) extension for Raspberry Pi camera modules. The 15-pin ribbon cable connects between the Raspberry Pi's CSI port and the camera module, extending the reach for remote mounting or enclosure ...

SKU: WS-20330 | Brand: Waveshare

RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For softwa...

SKU: EC-DRA09012K | Brand: Elecrow

An accessory kit for the Raspberry Pi Zero and Zero W that provides adapters and headers to expand the board's compact connectors to full-size interfaces. Includes a clear acrylic case, USB OTG cable, Mini HDMI adapte...

SKU: AF-3662 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need.  Absolutely no soldering required! All t...

SKU: AF-2324 | Brand: Adafruit

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell ba...

SKU: SF-PRT-14017 | Brand: SparkFun

This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to accommodate for enclosures or other parts that can en...

SKU: AF-3084 | Brand: Adafruit

Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim 13x13x3mm Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry ...

SKU: AF-3561 | Brand: Adafruit

If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables...

SKU: AF-3386 | Brand: Adafruit

The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux...

SKU: AF-6056 | Brand: Adafruit

A snap-on silicone cover that protects the base and edges of your Raspberry Pi 5 from scratches, bumps, and surface contact. Lightweight and flexible, it adds a layer of protection without adding bulk or blocking acce...

SKU: WS-25553 | Brand: Waveshare

A 3 MP camera module built around the SmartSens SC3336 sensor, designed for use with LuckFox Pico series boards. The 1/2.8" CMOS sensor delivers high-sensitivity, high-SNR imaging with strong low-light performance, ma...

SKU: WS-24783 | Brand: Waveshare

This 4.3" QLED display from Waveshare connects to Raspberry Pi via the DSI interface, providing a high-quality touchscreen with a single ribbon cable connection. The QLED (Quantum Dot LED) panel delivers a wider colou...

SKU: AF-5721 | Brand: Adafruit

We've lost count of how many times we've tried to mount a camera module onto a panel or enclosure but struggled to drill the very small M2 holes right at the edge of the camera board, and don't even mention trying to ...

SKU: AF-5705 | Brand: Adafruit

Witty Pi is an add-on board that adds real time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence and significantly reduce energy use. Witty Pi 4 L3V7 is the new member...

SKU: DF-FIT0604 | Brand: DFRobot

A transparent ABS case designed for the Raspberry Pi Zero and Zero W. The case features large cutouts for the GPIO header and camera port, keeping all connections accessible while protecting the board. The GPIO 40-pin...

SKU: DF-DFR0566 | Brand: DFRobot

An I/O expansion HAT for Raspberry Pi 4B and 3B+ that breaks out all GPIO pins into clearly labelled digital, analogue, PWM, I2C, UART, SPI, and I2S interfaces. The board is compatible with DFRobot Gravity series sens...

SKU: DF-DFR0591 | Brand: DFRobot

This Raspberry Pi e-ink display module comes with a 2.13” screen with a resolution of 250×122, adopting SPI interface to communicate with Raspberry Pi. It leads out the pins on Raspberry Pi, so there would be no co...

SKU: AF-2222 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi B+ with this normal-height female header.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3m...

SKU: SF-COM-08636 | Brand: SparkFun

The MCP3002 is a 10-bit analog-to-digital converter (ADC) with a simple SPI interface, available in a breadboard-friendly 8-pin DIP package. Use it to add analog input capability to microcontrollers that lack an ADC, ...

SKU: AF-2775 | Brand: Adafruit

Connect a device with a Mini HDMI port to a regular sized HDMI port together with this basic HDMI cable. It has nice molded grips for easy installation, and is 1.5 meter long (about 5 feet). Perfect for use wi...