Motors (DC, stepper, servo)

SKU: LB-LR0259 | Brand: Little Bird

This high quality micro-sized servo is an affordable and simple to use servo for all your mechatronic needs. This servo can operate from 3.0v-7.2v and delivering 1.6kg/cm maximum torque at 0.10 sec/60° The micro se...

SKU: LB-LR0228 | Brand: Little Bird

These are the popular 28YBJ-48 geared stepper motors with driver board. The motor and driver are suitable for 5V operation. 4 Phase Current : 160 mA per winding (320 mA in 4-step mode) Measured: 250mA stopped, 200...

SKU: EF-EF09081 | Brand: ElecFreaks

EF90D is a kind of 360 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and uses pulse width to adjust speed of the servo rotation, which also can be used to make...

SKU: WS-22311 | Brand: Waveshare

HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1/32 Microstepping Stepper Motor HAT (B) Alternative Solution Of Stepper Motor HAT, Drives Two Stepper Motors, Up To 1/32 Microstep...

SKU: LB-DCMOTOR | Brand: Little Bird

This is Little Birds new Hobby Motor with pre soldered jumper wires, making it super easy to breadboard with. It works well for basic things like making a fan or spinning something pretty fast without much resistan...

SKU: LB-LR0244 | Brand: Little Bird

This general-purpose 130-size hobby motor runs on 3–6V and spins at 4,000–8,000 RPM depending on the input voltage. Its compact size and 2 mm shaft make it well suited for small robotics projects, fan-powered cars, an...

SKU: DF-FIT0563 | Brand: DFRobot

This immersible pump can be used to water your plants, make a fountain or waterfall, even change your fish tank water. It comes with an inlet valve, you can adjust the water inflow manually. It works quietly with the...

SKU: LB-LS6502 | Brand: Little Bird

The MG996 Servo is a robust, high-torque servo designed for demanding applications. An upgrade to the popular MG995, this servo offers improved precision and performance with a redesigned PCB and IC control system. Fe...

SKU: DF-FIT0774 | Brand: DFRobot

A compact coin-type vibration motor measuring just 10 × 2.7 mm — roughly the size of a fingernail. It delivers strong vibration with low noise and operates across a 1.5–4.2 V range, with vibration intensity increasing...

SKU: DF-SER0043 | Brand: DFRobot

INTRODUCTION The TowerPro SG90C is a 360 degree micro servo. It uses a plastic gear drive and is light and compact. It can be used for various applications and DIY products, such as toy cars, boats, windmills etc...

SKU: EF-EF03406 | Brand: ElecFreaks

Motor:bit is a motor driving board based on micro:bit. It has integrated a TB6612 motor driving chip, which is used to drive two motors with maximun 1.2A DC single channel current. It has also integrated 12 GVS por...

SKU: AF-711 | Brand: Adafruit

A standard 130-size DC hobby motor with a wider operating range than typical toy motors: 4.5–9V DC instead of the usual 1.5–4.5V. This makes it ideal for Arduino and motor shield projects where 5V or 9V is readily ava...

SKU: PL-1636 | Brand: Pololu

This tiny, button-type, vibrating motor shakes with a vibration amplitude of 0.75g and draws approximately 60 mA when 3 V is applied to its leads. The shaftless design keeps this motor small: 10 mm i...

SKU: EF-EF09082 | Brand: ElecFreaks

EF92A is a kind of 180 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and can be used to make small robot modules, mechanical arm modules and intelligent car modul...

SKU: DF-SER0006 | Brand: DFRobot

A lightweight 9g micro servo with 1.6 kgf·cm of torque at 4.8V. Ideal for small-scale robotics, beam robots, and automation tasks where a compact, affordable servo is needed. At only 9 grams, it fits into tight spaces...

SKU: PR-PIM183 | Brand: Little Bird

Ideal for a mini CCTV system, this set of horizontal and vertical motion servos will give you Pi camera movement with a minimum of fuss. Pan-Tilt HAT lets you mount and control one of our pan-tilt modules right ...

SKU: LB-LS1017-60 | Brand: Little Bird

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. This 60 RPM variant uses a higher gear ratio for increased torque at lower speed, making it well-suite...

SKU: SF-ROB-11696 | Brand: SparkFun

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much res...

SKU: AF-3896 | Brand: Adafruit

A 3-bladed trifoil propeller designed to snap onto standard DC hobby motors. Great for making simple fans, wind-powered experiments, bubble machines, or lightweight propulsion projects. Key Features Snap-On Fit – P...

SKU: LB-PT-SERVO | Brand: Little Bird

A compact 9 g continuous rotation micro servo that spins 360° in either direction, rather than moving to a fixed position like a standard servo. Control it with any servo library, code, or hardware — just set the sign...