Infrared & Thermal Sensors

SKU: LB-LR0062 | Brand: Little Bird

This IR sensor can detect obstacles in front of it.  When an object is detected the green indicator light on the board will light up. There is a low-level output signal on the OUT port.It has a detection range of...

SKU: LB-FLAME-LIGHT | Brand: Little Bird

This IR flame sensor module detects flames and infrared light sources in the 760–1,100 nm wavelength range. With a detection angle of approximately 60° and a test range of up to 80 cm (depending on flame size), it pro...

SKU: LB-OWL-IR | Brand: Little Bird

An infrared receiver module that can read signals from most standard IR remote controls. Useful for adding remote control functionality to Arduino and microcontroller projects. Pair with an IR transmitter module to bu...

SKU: LB-LR0007 | Brand: Little Bird

Flame Detection Sensor Module for use with Arduino Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive60 degree detection sensor   Two outputs mode: AO: analog output, real-time ou...

SKU: LB-LR0006 | Brand: Little Bird

The infrared obstacle sensor is a compact IR proximity module designed for robotics and automation projects. It detects obstacles within a 2–40 cm range and outputs a TTL-level signal, making it easy to integrate with...

SKU: DF-SEN0158 | Brand: DFRobot

Want a robot to hunt down heat objects or navigated with fire? This is a small form factor IR camera capable of tracking up to four heat/IR sources. The applications are plenty and can go from tracking of robots wi...

SKU: AF-2168 | Brand: Adafruit

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that s...

SKU: DF-SEN0556 | Brand: DFRobot

An infrared proximity sensor that detects objects at distances of 10 ±5 mm to 80 ±20 mm by measuring reflected IR energy. It outputs a simple high/low digital signal, making it easy to integrate with Arduino and other...

SKU: AF-4161 | Brand: Adafruit

The Adafruit VCNL4040 is a two-in-one proximity and ambient light sensor from Vishay. It measures proximity from 0 to 200 mm (~7.5 inches) using an on-board IR LED, and ambient light from 0.0125 to 6,553 lux — all ove...

SKU: PL-2578 | Brand: Pololu

This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This high-brightness version draws an average of 16 mA at 5&...

SKU: EF-EF04002 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various...

SKU: AF-466 | Brand: Adafruit

The VCNL4010 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project. For longer distances (in the range of cm, you can use a SHARP IR distance sensor, but those are only good ...

SKU: AF-2167 | Brand: Adafruit

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to tha...

SKU: PL-2461 | Brand: Pololu

Discontinuation notice: These original (irs05a) versions of our 38 kHz IR proximity sensors have been replaced by newer (irs05b) high-brightness and low-brightness versions. The main changes are the locations o...

SKU: EF-EF04003 | Brand: ElecFreaks

The Octopus Flame Sensor is a simple infrared-based module that detects the presence of a flame or fire source. Part of the Octopus Electronic Bricks system, it connects directly to Arduino and compatible boards with ...

SKU: LB-00061 | Brand: Little Bird

OverviewDeveloped as a quick starter board for the less experienced we envision this board as the follow up to your first soldering session.In isolation this board will produce a middle C note by hovering over the boa...