Industrial

These 2" long stainless steel D-Shafts have a diameter of ¼". The flat edge that runs the length of the shaft makes it an ideal drive shaft, when u...

These zinc-plated socket head machine screws are 3/4” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64"...

These 8" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tub...

These 4" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

These ½" bore hub spacers allow you to space your sprocket, gear, wheel, or other attachment from the mating hub. These hubs utilize the 0.77" h...

This is the XBee XB24-Z7UIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to crea...

These lipped Rubber Rings have an inner diameter of 5.65", a width of ¼", and a sturdy rubber sidewall. These rings can be used as a replacement fo...

These 2" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating ...

These stainless steel shaft couplers allow you to couple two size shafts together. They can be used for connecting motor shafts to drive shafts,...

These plastic shaft spacers have an inner diameter of 5/8” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bear...

These round pillow block bearing mounts attach to the outside of a channel and have a ball bearing with a 1” bore for shafts and tubes. These be...

The Weller Portasol Kit is a fantastic box filled with a pocket-sized, butane-powered soldering iron as well as multiple attachments for it. Each s...

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 64 teeth with a...

These channel brackets (C type) provide you with an attachment point for a channel mountable gearbox kit. They share the same 0.5" center hole a...

These 6" long aluminum tubes have an outer diameter of 3/8", an inner diameter of 0.30", and a wall thickness of 0.035". When used with the mating ...

These quad hub mounts can attach to the end or the middle of Actobotics channels to provide you a 90 degree angle with additional attachment poi...

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 80 teeth with a...

This is a set of 13 high-quality hex keys from Allen. Each key in this set is equipped with a ball end, allowing an entry angle up to 25° in the sc...

These 4" long stainless steel shafts have a diameter of 5/16". These shafts are solid, which makes them an ideal choice for axles. These shafts hav...

These 1" long stainless steel shafts have a diameter of ¼". These shafts are solid, which makes them an ideal choice for axles. These shafts have a...

These hub-mountable aluminum gears are ideal for transmitting motion from a motor or servo to a wheel or shaft. These gears have 76 teeth with a...

These side mount brackets can function as mounts for endcaps for Actobotics channels. They have two untapped holes spaced 0.44" apart perpendicu...

These 10" long aluminum tubes have an outer diameter of 5/8", an inner diameter of 0.569", and a wall thickness of 0.028". When used with the matin...

These single channel brackets mate directly to Actobotics channels and hub mounts and are useful as attachment points. They share the same 0.5" cen...