Industrial

The USB 2.0 to RS422/RS485 Cable provides a simple and easy to connect between the USB and RS422/RS485 ports interface. Ideally for PC, thin cli...

This is your standard fridge magnet, perfect for holding up quite a bit of weight. Grade C8, ceramic disk magnet. Magnetization is throughout the t...

Ever wanted to see what’s on that SIM card? Use these sockets in your next project to interface to any old SIM. 6-Pin standard connection. This is ...

This tiny carrier board makes it easy to integrate a Sharp GP2Y0D815Z0F, GP2Y0D810Z0F, or GP2Y0D805Z0F digital distance sensor into your project by...

Thermocouples are best used for measuring temperatures that can go above 100 °C. This is a bare wires bead-probe which can measure air or surfac...

This M3, pan-head screw is 8 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

If you ever find yourself connecting handfuls of resistors to the ground bus of your breadboard, you may consider these SIL-packaged resistors as a...

Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft. The kn...

Thermocouples are best used for measuring temperatures that can go above 100°C. This is a bare wires stainless-steel tip probe which can measure...

We went back to the drawing-board and re-engineered our favorite tape! How did we make it better? We made it out of paper instead of plastic! No...

G3/4 12V PP Normally Closed Type Solenoid Valve Water Diverter DeviceThis is made of PP material and it is water proof, damp-proof, temperature res...

Do you have some liquids that you need to move? This fluid pump will move 500 gallons per hour! The SEAFLO mini water pump has a heavy duty 12V, 1....

The module adopts the standard Modbus RTU protocol, the communication interface supports RS485 or RS232 and supports communication baud rates of 24...

This is a panel mount pushbutton. It has a nice dome shaped button that has a smooth momentary feel.The button is normally open, when pressed th...

AGS02MA is a MEMS TVOC gas sensor with a calibrated digital signal output. It uses dedicated digital module acquisition technology and gas sensi...

Get your 'bot rolling with this durable and smooth steel ball caster. We like the size (not too big, not too small) and surprisingly fluid motio...

This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 9 V with an available o...

These high capacity batteries are used in many desktop and notebook computers to retain date, time and configuration information while the compute...

Specification: Product Name:DC Geared Motor Product Model: N20 Product Material: metal Main colour: silver tone Length: approx.36mm Rated Voltage:D...

A 16mm yellow/orange illuminated momentary button that's ideal as a power button for our Picade X HAT, or just for situations when you need a sm...

Push-on, clear plastic cap for mini rocker switches.Suits switches SK-0984, SK-0985, SK-0987. Specifications ...

Get swinging with this handy plastic hinge, attach it to your 20mm extrusion and you can have parts that swing open 180 degrees. Using our button s...

Cute as a button, these button-head hex screws are what we suggest for putting together a project with our slotted extruded aluminum. Use a 2.5mm h...

Gravity: Digital Signal Isolator is capable of isolating I2C digital signal and providing isolated power to the sensor module, effectively preventi...